Complete Inventory Listing



Back to Inventory Home
Below you will find every single active inventory item that we have available for sale. Please use the search box located in the top right corner of the table to narrow your search. The search term will work on all columns of the table, including description and category code. Use multiple words to narrow your search further. This master inventory listing is updated hourly.

Click on the inventory description to view details for that inventory item. Click on the category description to view all inventory available in that specific category.

Inventory Description Category Name UMCC
Fab Rite Vertical Air Tank AIR CLEANING EQUIPMENT A1720
Fab Rite Vertical Air Tank, Approximately 38" x 95" AIR COMPRESSOR, ACCESSORIES A1802
50 HP. Atlas Copo Rotary Screw Compressor AIR COMPRESSORS, BREATHABLE A1850
INGERSOLL RAND REFRIGERATED AIR DRYER AIR COMPRESSORS, DRYERS, (Refrigerated) - See Also A2689 A2140
125 PSI, SULLAIR No. SRD 830, As Taken From Service AIR COMPRESSORS, DRYERS, (Refrigerated) - See Also A2689 A2140
125 PSI, GARDNER DENVER No. EAUSQG, 250 HP, Enclosed, 1997, As-Is For Parts or Rebuild AIR COMPRESSORS, ROTARY SCREW/SLIDING VANE A2450
500 HP QUINCY ROTARY SCREW AIR COMPRESSOR AIR COMPRESSORS, ROTARY SCREW/SLIDING VANE A2450
104 CFM, 125 PSI, ATLAS COPCO, No. GA118, 25 HP, Clean AIR COMPRESSORS, ROTARY SCREW/SLIDING VANE A2450
450 CFM, 125 PSI, LeRoi/CompAir No. WE100SSIIA, 100 HP, 1997, Low Price AIR COMPRESSORS, ROTARY SCREW/SLIDING VANE A2450
5 HP ROL-AIR AIR COMPRESSORS, TANK MOUNTED A2570
14 CFM, 135 PSI, SPEEDAIRE, 5 HP, Two Stage, 60 Gallon Vert. Tank, 1999 AIR COMPRESSORS, TANK MOUNTED A2570
AIR DRYER AIR DRYERS - See Also A2125, A2140, D7585 A2689
Air Cel Systems Air Dryer AIR DRYERS - See Also A2125, A2140, D7585 A2689
60" American Environmental Products Corp No. 600, Vertical, Low Price BALERS, PAPER & NON-FERROUS METALS B0604
SELCO, Hydraulic BALERS, PAPER & NON-FERROUS METALS B0604
Eagletronic No. EE4800-MTL2, 36 Volt - 180A, 480V Input, Nice BATTERY CHARGERS B1365
2-1/2" PINES No. 1-1/4, Hyd., 20 HP, Digital Dial-A-Bend, Mandrel Extractor, 1988 BENDERS, PIPE, TUBE & BAR B1804
DIACRO, No. 2, Hand, 1/2 Round Steel, 3/4" Steel Tubing, Stand BENDERS, PIPE, TUBE & BAR B1804
WALLACE TUBE BENDER BENDERS, PIPE, TUBE & BAR B1804
2", ERCOLINA, No. 050KD, Economy Top Bender BENDERS, PIPE, TUBE & BAR B1804
No.2 HOSSFELD, Universal, New BENDERS, PIPE, TUBE & BAR B1804
2", ERCOLINA, No. SB48, 2" Tube, 1-1/4" Sch. 40 Pipe, PLC Control, New BENDERS, PIPE, TUBE & BAR B1804
2" ERCOLINA, No. TB60, Rotary Draw, Programmable Control, New BENDERS, PIPE, TUBE & BAR B1804
ERCOLINA, No. 060 SUPER BENDER, BENDERS, PIPE, TUBE & BAR B1804
Pangborn BLAST CLEANING / AIR & SUCTION - See Also S5054 B2754
Pangborn BLAST CLEANING / AIR & SUCTION - See Also S5054 B2754
TRINCO No. 36/BP2, Two Glove, 13" x 36" Top Opening, 11" x 17" Side Opening, Dust Collector BLAST CLEANING / AIR & SUCTION - See Also S5054 B2754
USF BCP/ WHEELABRATOR, (2) 15 HP Auto-Blast Wheels, Flex Belt, Continuous Tumblast, 2001 BLAST CLEANING / AIR & SUCTION - See Also S5054 B2754
Zero Blast Cabinet BLAST CLEANING / AIR & SUCTION - See Also S5054 B2754
4" KURAKI Horizontal Boring Mill, No. KBT-101, 35" x 67" Table, 48" Vertical, Facing Head, 15 HP BORING MILLS, HORIZONTAL, TABLE TYPE B5500
54" Bullard Cutmaster, 120 RPM, 4-Jaw, Ram, Turret & Side Head, 30 HP, Nice BORING MILLS, VERTICAL - (Including Vertical Turret Lathes) B6006
72" WEBSTER & BENNETT "EM", 84" Swing, 5.2-117 RPM, 48" Under Rail, T.H., 4-Jaw, Tracer, 40 HP, 1974 BORING MILLS, VERTICAL - (Including Vertical Turret Lathes) B6006
42" BULLARD Spiral Drive, 4-Jaw, Turret & Side Head BORING MILLS, VERTICAL - (Including Vertical Turret Lathes) B6006
54" BULLARD Cutmaster, 4-Jaw, Turret, Ram & Side Head BORING MILLS, VERTICAL - (Including Vertical Turret Lathes) B6006
14 Ga. x 6' Dreis & Krump No. W-36, Complete Set Of Fingers BRAKES, BOX & PAN (Finger) B6968
12 Ga. x 4' NATIONAL, No. U6-4812, Floor Model, 6" Max. Depth Of Box, New BRAKES, BOX & PAN (Finger) B6968
16 Ga. x 4' NATIONAL, No. U4816, 4" Max. Depth Of Box, New BRAKES, BOX & PAN (Finger) B6968
14 Ga. x 8', NATIONAL, No. U6-9614, Heavy Duty, 6" Max. Depth Of Box, New-In Stock BRAKES, BOX & PAN (Finger) B6968
16 Ga. x 6', NATIONAL, No. U7216, Floor Model, New BRAKES, BOX & PAN (Finger) B6968
16 Ga. x 10', NATIONAL, No. U6-12016, Heavy Duty, 6" Max. Depth Of Box, New BRAKES, BOX & PAN (Finger) B6968
14 Ga. x 8', NATIONAL, No. U6-9614, Heavy Duty, 6" Max. Depth Of Box, New BRAKES, BOX & PAN (Finger) B6968
12 Ga. x 6', NATIONAL, No. U6-7212, Heavy Duty, 6" Max. Depth Of Box, New BRAKES, BOX & PAN (Finger) B6968
12 Ga. x 4', NATIONAL, No. U6-4812, Floor Model, 6" Max. Depth Of Box, New BRAKES, BOX & PAN (Finger) B6968
16 Ga. x 8' NATIONAL, No. U9616, Box and Pan Brake, Floor Model, New BRAKES, BOX & PAN (Finger) B6968
12 Ga. x 6', NATIONAL, No. U7212, Floor Model, New BRAKES, BOX & PAN (Finger) B6968
16 Ga. x 6', NATIONAL, No. U7216, Floor Model, New BRAKES, BOX & PAN (Finger) B6968
12 Ga. x 4', NATIONAL, No. U4812, Floor Model, New BRAKES, BOX & PAN (Finger) B6968
16 Ga. x 4' NATIONAL, No. U4816, 4" Max. Depth Of Box, New BRAKES, BOX & PAN (Finger) B6968
16 Ga. x 4', TENNSMITH, No. HBU48-16, New BRAKES, BOX & PAN (Finger) B6968
16 Ga. x 10' NATIONAL, No. N12016, Floor Model, New, In Stock BRAKES, HAND - See Also B6950 B6985
16 Ga. x 8', NATIONAL, No. N9616, Floor Model, New BRAKES, HAND - See Also B6950 B6985
12 Ga. x 97" TENNSMITH No. HB97-12, New BRAKES, HAND - See Also B6950 B6985
14 Ga. x 8' NATIONAL No. N9614, Floor Model, New BRAKES, HAND - See Also B6950 B6985
NATIONAL, Stand For 48" Bench Model Brakes BRAKES, HAND - See Also B6950 B6985
14 Ga. x 10', NATIONAL, No. N12014, Floor Model, New BRAKES, HAND - See Also B6950 B6985
16 Ga. x 10', NATIONAL, No. N12016, Floor Model, New BRAKES, HAND - See Also B6950 B6985
14 Ga. x 8', NATIONAL, No. N9614, Floor Model, New BRAKES, HAND - See Also B6950 B6985
12 Ga. x 6', NATIONAL, No. N7212, Floor Model, New BRAKES, HAND - See Also B6950 B6985
12 Ga. x 4', NATIONAL, No. N4812, Floor Model, New BRAKES, HAND - See Also B6950 B6985
16 Ga. x 4', NATIONAL, No. S4816, Bench Model, New BRAKES, HAND - See Also B6950 B6985
16 Ga. x 6', TENNSMITH, No. HB73-16, New BRAKES, HAND - See Also B6950 B6985
16 Ga. x 8', TENNSMITH, No. HB97-16, New BRAKES, HAND - See Also B6950 B6985
16 Ga. x 4', TENNSMITH, No. HBS48-16, New BRAKES, HAND - See Also B6950 B6985
22 Ga. x 4', Tennsmith, No. H48-22, New BRAKES, HAND - See Also B6950 B6985
150 Ton ATLANTIC No. HDE150-14, Hyd., 16' O.A., 12' B.H., 1995, Low Price BRAKES, PRESS, HYDRAULIC (Inch/Ton) - See Also B7335 B7015
DONEWELL CNC PRESS BRAKE BRAKES, PRESS, HYDRAULIC (Inch/Ton) - See Also B7335 B7015
350 Ton CINCINNATI No. CB350X12, 14' O.A., 12'6" B.H., 10" Stroke, 30 HP, 4-Way Die BRAKES, PRESS, HYDRAULIC (Inch/Ton) - See Also B7335 B7015
750 Ton STANDARD INDUSTRIAL, 14' O.A., 12'5" B.H., New-Built To Order BRAKES, PRESS, HYDRAULIC (Inch/Ton) - See Also B7335 B7015
160 Ton BETENBENDER No. 10-160, Hyd, 10' OA, 102" B.H., 8" Str., New BRAKES, PRESS, HYDRAULIC (Inch/Ton) - See Also B7335 B7015
100 TON Cincinnati No. 40-10, 12' O.A., 10'6" B.H., 3" Stroke, 12" Die Space, Low Price BRAKES, PRESS, MECHANICAL (Inch/Ton) - See Also B7335 B7020
100 Ton Cincinnati 4-10, 12' O.A., 10'6" B.H., 3" Stroke, Low Price BRAKES, PRESS, MECHANICAL (Inch/Ton) - See Also B7335 B7020
135 TON Cincinnati 5-12, 14' O.A., 12'6" B.H., 3" Stroke, 12" Die Space, Low Price BRAKES, PRESS, MECHANICAL (Inch/Ton) - See Also B7335 B7020
150 Ton WYSONG No. 150-10, 12' O.A., 10'6" B.H., 3" Str., 12" Die Space, 1979 BRAKES, PRESS, MECHANICAL (Inch/Ton) - See Also B7335 B7020
55 TON WISCONSIN No. 8FM55, Mech., 8' OA, 78" B.H., 3" Str. BRAKES, PRESS, MECHANICAL (Inch/Ton) - See Also B7335 B7020
45 Ton Heim Mechanical Press Brake BRAKES, PRESS, MECHANICAL (Inch/Ton) - See Also B7335 B7020
60 Ton WYSONG No. H-60-96, 8' O.A., 6'6" B.H., 2.5" Str. HURCO 5C , 1989, Clean BRAKES, PRESS, N/C & CNC, (Including Hyd/Mech) - See Also B7015,B7020 B7335
D.E. Buffer BUFFERS & POLISHERS - See P3454 B9004
WESTFALIA Centrifuge, Model OSC-30-01036/25, Stainless Steel, New 2002 CENTERING MACHINES - See Also F0335, M1253 C1050
15" UNION STEEL 4-JAW MANUAL CHUCK CHUCKS, See Also T3953 C1950
GAMET,CHUCK CYLINDER CHUCKS, See Also T3953 C1950
CUSHMAN, CHUCK CYLINDER CHUCKS, See Also T3953 C1950
LOGANSPORT, CHUCK CYLINDER CHUCKS, See Also T3953 C1950
LOGANSPORT, CHUCK CYLINDER CHUCKS, See Also T3953 C1950
GAMET, CHUCK CYLINDER CHUCKS, See Also T3953 C1950
GAMET, CHUCK CYLINDER CHUCKS, See Also T3953 C1950
LOGANSPORT AIR CYLINDER/F POWER CHUCK CHUCKS, See Also T3953 C1950
LOGANSPORT CHUCK CYLINDER CHUCKS, See Also T3953 C1950
CUSHMAN, CHUCK CYLINDER CHUCKS, See Also T3953 C1950
GAMET-POWERHOLD, CHUCK CYLINDER CHUCKS, See Also T3953 C1950
LOGANSPORT, CHUCK CYLINDER CHUCKS, See Also T3953 C1950
LOGANSPORT, CHUCK CYLINDER CHUCKS, See Also T3953 C1950
18" 3-Jaw SKINNER STEEL CHUCK CHUCKS, See Also T3953 C1950
21" 3 JAW GISHOLT STEEL CHUCK CHUCKS, See Also T3953 C1950
34" Chuck face Plate CHUCKS, See Also T3953 C1950
36" Face Plate CHUCKS, See Also T3953 C1950
34" FACE PLATE CHUCK CHUCKS, See Also T3953 C1950
47", MORANDO, 3-Jaw,Power chuck CHUCKS, See Also T3953 C1950
LOGANSPORT, No. S-61014 Chuck Cylinder CHUCKS, See Also T3953 C1950
LOGANSPORT, No. S-61014 Chuck Cylinder CHUCKS, See Also T3953 C1950
LOGANSPORT, No. S-60516N02.5 Chuck Cylinder CHUCKS, See Also T3953 C1950
LOGANSPORT, No. S-60962,Chuck Cylinder CHUCKS, See Also T3953 C1950
10" Logansport, 3-Jaw Power Chuck, A1-6 Back CHUCKS, See Also T3953 C1950
10" SP Sheffer, 3-Jaw Power Chuck CHUCKS, See Also T3953 C1950
10" SP 3-Jaw Power Chuck CHUCKS, See Also T3953 C1950
12" Cushman, 3-Jaw Power Chuck,Md.10-590-12-A08C,A-8 back CHUCKS, See Also T3953 C1950
12" Cushman, 3-Jaw Power Chuck,Md.10-590-12-Ao8C,A-8 back CHUCKS, See Also T3953 C1950
12" Cushman, 3-Jaw Power Chuck,Md.10-590-12-A08C,A-8 Back CHUCKS, See Also T3953 C1950
12" Cushman, 3-Jaw Power Chuck,Md.1059012-A08C-U-01051,A-8 back CHUCKS, See Also T3953 C1950
12" CUSHMAN 3-Jaw Power, 2-1/2" Hole, A1-8 CHUCKS, See Also T3953 C1950
12" CUSHMAN 3- Jaw Power, 2-1/2" Hole, A1-8 Back CHUCKS, See Also T3953 C1950
10" SP, 3- Jaw Power,2 3/4" thru hole,Flat Back CHUCKS, See Also T3953 C1950
10" SP Sheffer, 3-Jaw Power, 3" Hole, A1-8 CHUCKS, See Also T3953 C1950
10" Cushman, 2-Jaw Power Chuck, No Hole CHUCKS, See Also T3953 C1950
10" Powerhold-Gamet, 3-Jaw Power Chuck CHUCKS, See Also T3953 C1950
6-1/4" Rohm, 3-Jaw Power No. DURO-NC-160, A1-5, 5500 RPM CHUCKS, See Also T3953 C1950
10" Cushman, 2- Jaw Power Chuck, No Hole CHUCKS, See Also T3953 C1950
12" Gamet, 3-Jaw,Md. 350MX-3-A8,3 3/4" thru hole,serrated jaws CHUCKS, See Also T3953 C1950
15" Cushman, 3-Jaw Power Chuck CHUCKS, See Also T3953 C1950
12" Cushman, 3-Jaw Power Chuck, No Hole CHUCKS, See Also T3953 C1950
12" Cushman, 3-Jaw,2 7/8" thru hole,serrated jaws,A1-8 back Flame treated CHUCKS, See Also T3953 C1950
12" Logan, 3-Jaw Power Chuck,Md.362-12-6,center,A1-6 back,tongue-groove jaws CHUCKS, See Also T3953 C1950
15" Cushman, 4-Jaw,Steel Chuck, L-1 back, 3 3/16" hole, 1 piece jaws CHUCKS, See Also T3953 C1950
15" Cushman, 4-Jaw,Steel chuck,L-1 back,3 3/16" Hole.1 piece jaws CHUCKS, See Also T3953 C1950
14" Gamet, 3-Jaw Power Chuck,3 5/8" thru hole,A1-8 back CHUCKS, See Also T3953 C1950
6" Rohm, 3-Jaw Power,Duro-NC160,1 1/4" thru hole,A1-5 back CHUCKS, See Also T3953 C1950
Gamet, Chuck Cylinder,Model 43VX,Ser.No.15698 CHUCKS, See Also T3953 C1950
Logansport, Chuck Cylinder CHUCKS, See Also T3953 C1950
Logansport, Chuck Cylinder CHUCKS, See Also T3953 C1950
14 1/4" x 60" Electro Magnetic Chuck CHUCKS, See Also T3953 C1950
48" O.S.Walker No.48R, Permenant Magnetic Chuck CHUCKS, See Also T3953 C1950
18" Logan, 3-Jaw, Power Chuck CHUCKS, See Also T3953 C1950
12",MMK,3-Jaw Power Chuck W/Cylinder,3.5" Thru Hole,Set of Hard Jaws CHUCKS, See Also T3953 C1950
Logansport, Chuck Cylinder, Part No. 801C-8 CHUCKS, See Also T3953 C1950
MMK, Chuck Cylinder,Md No. Type ZKP195193-20 CHUCKS, See Also T3953 C1950
12", Autoblok,3 jaw power,4 3/4" hole,Flat Back CHUCKS, See Also T3953 C1950
15" Cushman, 3 Jaw Power,3" thru hole, CHUCKS, See Also T3953 C1950
10" SP, Mdl.CC, 3-Jaw Power Chuck,3" thru hole,A1-8 back, CHUCKS, See Also T3953 C1950
10" SP Mdl.10CC, 3-Jaw Power Chuck,A1-8 back.3" thru hole,A1-8 back CHUCKS, See Also T3953 C1950
12" Howa, 3-Jaw, Hyd., CHUCKS, See Also T3953 C1950
12" Howa, 3-Jaw, Hyd., CHUCKS, See Also T3953 C1950
SPEED CHUCK, JACOBS Rubber Flex CHUCKS, See Also T3953 C1950
10" x 48", Hanchett-Magna-Lock , 110V D.C., 4" High CHUCKS, See Also T3953 C1950
10" x 72", Hanchett-Magna-Lock, 110V D.C., 4" High CHUCKS, See Also T3953 C1950
10" x 18" Hanchett Magna Lock Electro Magnetic Chuck, Fine Pole,110 Volts DC CHUCKS, See Also T3953 C1950
42", SCHIESS, 4-Jaw,chuck CHUCKS, See Also T3953 C1950
Electro Magnetic Chuck, 11-13/16" x 47-1/4" CHUCKS, See Also T3953 C1950
800 AMP SQUARE D MOLDED CASE CIRCUIT BREAKER CIRCUIT BREAKERS, MOLDED CASE C2230
400 Amp, SQUARE D, LA400A, CIRCUIT BREAKERS, MOLDED CASE C2230
300 Amp, SQUARE D, LA300A, CIRCUIT BREAKERS, MOLDED CASE C2230
300 Amp, SQUARE D, LA300A, CIRCUIT BREAKERS, MOLDED CASE C2230
300 Amp, SQUARE D, LA300A, CIRCUIT BREAKERS, MOLDED CASE C2230
300 Amp, SQUARE D, LA300A, CIRCUIT BREAKERS, MOLDED CASE C2230
24" SPI Optical Comparator COMPARATORS C3806
30" SCHERR TOMICO No. P-1700, 20X, 50X, Surface Illum., Low Price COMPARATORS C3806
30" J & L EPIC-30, 8" x 32" Tbl., 10X, 20X, DRO, Pwr Elev. COMPARATORS C3806
12", NIKON, No. 6C, Vert. Beam, Lens Turret, Chart Ring, Surface Reflection COMPARATORS C3806
14" Ex-Cell-O Mdl.14-5, 8" x 26" Tbl., Surface Reflection, Lens Turret COMPARATORS C3806
14", KODAK, No. 14-2A, Surface Illumination, 10X & 31.25X Lenses, 1 Phase COMPARATORS C3806
Phase-A-Matic R-10 Rotary Converter 10HP 220 Volt 60 Hz 3ph S/N CONVERTERS, SINGLE/3 PHASE C5156
POWER ROLLER CONVEYOR, 67" Wide CONVEYORS, ROLLER C5525
SCOTCHMAN RG Auto Feed System-SUP Series, 16', New CONVEYORS, ROLLER C5525
D.E. SMITH, No. LV638, Koolant Koolers Chiller, 80-100 GPM, 2002, Nice COOLANT FILTERING SYSTEMS C5761
HYDROFLOW, No. FA-60, 2002, Paper Filter, Clean Tank, 10HP ,3-1HP Pump Motors COOLANT FILTERING SYSTEMS C5761
2 Ton Yale Pedestal Jib Crane CRANES, JIB C6575
PEDRAZZOLI, SCL 102-3000, Program Cutting Line, 12" Blade, Unloader, 1995 CUT-OFF LINES - See Also C8090, S5456 C7904
3-1/4" MODERN CUT-OFF MACHINE, No. 3LD, 1/4" - 3-1/4", 20' Bar Feed, A-B PLC, Tooling, 10 HP, 1994 CUT-OFFS, PIPE, TUBE & BAR - See Also F1906, F1925, T6855 C8030
4-5/8", MODERN, No. 4B, Manual, 4" Pipe, Front Slide, 3 HP, Low Price CUT-OFFS, PIPE, TUBE & BAR - See Also F1906, F1925, T6855 C8030
MAGNAFLUX, No. SB911, 1 Phase, 440 Volt DEMAGNETIZERS - See Also I5006 D1454
KANETSU, No. KMDT-40, 11 KVA, 15-5/8" x 12-1/2"H Opening DEMAGNETIZERS - See Also I5006 D1454
Unknown DEMAGNETIZERS - See Also I5006 D1454
Unknown DEMAGNETIZERS - See Also I5006 D1454
No. SB-911, MAGNAFLUX, 9" x 11" Coil Opening, 8800 Amp, 30/30 Duty Cycle DEMAGNETIZERS - See Also I5006 D1454
ELECTRO-MATIC, DEMAGNETIZERS - See Also I5006 D1454
ELECTRO ARC METAL DISINTEGRATOR, No 2DBT, Auto Feed, Coolant, Clean DISINTEGRATORS, METAL D2875
DeHoff No. W-3, 3-Spindle, 18" Stroke, 1/2" Capacity, Coolant DRILLS, GUN - See Also D4402, D4904 D4554
2 Spindle Rockwell Drill Press, 15", No. 15-665, 425-5500 RPM, 29" x 40" Table, 3/4 HP DRILLS, HVY DUTY & SENSITIVE, MULTI SPDL - See Also D4504 D4803
24" Cincinnati Bickford Super Service, 60-1000 RPM, 4 M.T., P.F., 22" Dia. Tbl., 5 HP DRILLS, HEAVY DUTY & SENSITIVE, (Single Vertical Spindle) D4810
20" Chen Fwa No. CD-30, Floor Type, Gear Head, 3 M.T., 120-1640 RPM, 14" x 19" Tbl., 1 HP DRILLS, HEAVY DUTY & SENSITIVE, (Single Vertical Spindle) D4810
20" POWERMATIC No. 1200 DRILLS, HEAVY DUTY & SENSITIVE, (Single Vertical Spindle) D4810
CAST IRON,OIL GROOVED DRILL TABLE DRILLS, HEAVY DUTY & SENSITIVE, (Single Vertical Spindle) D4810
BUFFALO DRILL PRESS DRILLS, HEAVY DUTY & SENSITIVE, (Single Vertical Spindle) D4810
20" Rockwell,Md.70-330,Var-Speed,125-1250 RPM.,3 MT.,18"x16" Tilting Table DRILLS, HEAVY DUTY & SENSITIVE, (Single Vertical Spindle) D4810
15", ROCKWELL, Hand, Bench Model,V-Speed 450-4700 RPM, ,14" x 11" Tbl., 3/4 HP DRILLS, HEAVY DUTY & SENSITIVE, (Single Vertical Spindle) D4810
20" POWERMATIC No. 1200, (4) Spindle DRILLS, MULTIPLE-HEAD - See D3700 D5404
21 SPDL, MOLINE, No. HD68, In-Line, 75 HP, 84" x 84" Tbl., A-B 8400 CNC 1991 DRILLS, MULTIPLE SPINDLE, N/C & CNC - See Also M0195 D5445
Carlton Radial Drill Base, Off 5' x 11" Drill, 36" x 66" Work Surface DRILLS, RADIAL D5700
4' x 11" CARLTON No. 1A, 80-2000 RPM, 4 M.T., Pwr Elev & Clamp, Box Tbl, Clean DRILLS, RADIAL D5700
3' x 9" CARLTON OA, 100-2000 RPM, 4 M.T., Pwr Elev., Box Tbl., 5 HP, Clean DRILLS, RADIAL D5700
2'6" x 6" JOHANSSON, Hand Feed, 80-1200 RPM, 4 MT, 20" x 40" Tbl., 1 HP DRILLS, RADIAL D5700
4' x 13" AMERICAN "Hole Wizard", 25-2000 RPM, 5 M.T., 10 HP, Nice DRILLS, RADIAL D5700
4' x 11" CINTI-BICKFORD, 14-1500 RPM, 5 M.T., Extra Height, 7-1/2 HP, Nice DRILLS, RADIAL D5700
6' x 17" CINCINNATI BICKFORD, 8-1700 RPM, 6 M.T., 20 HP, Nice DRILLS, RADIAL D5700
4' x 15" AMERICAN "Hole Wizard", 20-1600 RPM, No 5 MT, 20 HP, Nice DRILLS, RADIAL D5700
Asquith-Archdale Radial Drill DRILLS, RADIAL D5700
5' x 11" G & L Bickford Chipmaster DRILLS, RADIAL D5700
ARRESTALL DUST COLLECTORS D8300
AERCOLOGY No. FDV-20 DUST COLLECTORS D8300
DCE No. UMA102G3AD DUST COLLECTORS D8300
AIRFLOW AIR CLEANER DUST COLLECTORS D8300
AIR-FLOW AIR CLEANER DUST COLLECTORS D8300
TORIT DUST COLLECTOR DUST COLLECTORS D8300
LINCOLN/EFFEX No. FU-60AU, Fumes & Dust, Cartridge Type DUST COLLECTORS D8300
DUSTVENT, No. 3-150, Bag Type, 3 HP DUST COLLECTORS D8300
30,000 CFM BAG HOUSE DUST COLLECTOR DUST COLLECTORS D8300
Hansvedt No. SM-150B, Bench Top, 20 Amp, 5" x 13" Platen, 13" x 20" x 9"D Work Tank, 3R Tooling ELECTRIC DISCHARGE MACHINES, CONVENTIONAL, (Ram Type, Sinker) E2400
ELOX EDM Machine, No. 18-6636, 36" Long., 16" Cross, 72" x 40" x 20" Tank, FANUC 6MB, ELECTRIC DISCHARGE MACHINES, CONVENTIONAL, N/C & CNC E2425
Koike Track Burner FLAME CUTTING EQUIPMENT, N/C & CNC F1925
75 KVA Cummins Diesel Generator Set GENERATORS G2500
NELMOR No. G1012P1 GRANULATORS G3754
HOLMES COAL PULVERIZER GRANULATORS G3754
6" KALAMAZOO No. S6MS, 6" x 48" Belt, 6" x 10" Tbl., 3 HP, 1 Phase GRINDERS, BELT - See Also P3454, S0403 G3975
4" Engelberg No. AG4, Horiz/Vert., 54" Belt, 1 HP GRINDERS, BELT - See Also P3454, S0403 G3975
6", KALAMAZOO,Combination Belt,Disc Sander, 60/3 or 60/1 GRINDERS, BELT - See Also P3454, S0403 G3975
TIMESAVER, Model CS360, Multi-Directional Abrasive Disc Machine, Year 2000 GRINDERS, BELT - See Also P3454, S0403 G3975
6" KALAMAZOO No. S612V Belt & Disc, 12" Disc, 3 HP, Vacuum Base, New GRINDERS, BELT - See Also P3454, S0403 G3975
2" BURR KING X400, 8000 FPM, 2" x 48" Belt, 1 HP, New GRINDERS, BELT - See Also P3454, S0403 G3975
6" KALAMAZOO No. S6MV, 48"L Belt, 6" x 10" Tbl., 3500 SFPM, 3 HP, Dust Collector & Stand, New GRINDERS, BELT - See Also P3454, S0403 G3975
4" KALAMAZOO No. S460V, 4" x 60" Belt, 4" x 6" Tbl., Dust Collector, 1 HP, New GRINDERS, BELT - See Also P3454, S0403 G3975
4" KALAMAZOO No. S4SV, 4" x 36" Belt, 1 /2 HP, Dust Collector, 1 Phase, New GRINDERS, BELT - See Also P3454, S0403 G3975
4", BURR KING, No. 960, 6500 FPM, 3 HP, New GRINDERS, BELT - See Also P3454, S0403 G3975
6", KALAMAZOO, No. S6MS, 48"L Belt, 6" x 10" Tbl., 3500 SFPM, 3 HP, Stand, New GRINDERS, BELT - See Also P3454, S0403 G3975
6" KALAMAZOO No. S612 Belt & Disc, 12" Disc, 3 HP, New GRINDERS, BELT - See Also P3454, S0403 G3975
2", BURR KING, No. 482, 48" Belt, 6000 FPM, 1 HP, 1 Phase, New GRINDERS, BELT - See Also P3454, S0403 G3975
1-1/2", BURR KING, No. 760, Vari-Speed 800-8000 FPM, 1-1/2 HP, 1 Phase GRINDERS, BELT - See Also P3454, S0403 G3975
HAMMOND No. OD-2-6 Finisher, 2" Capacity, 6" Belt, 7-1/2 HP, Coolant, Clean GRINDERS, CENTERLESS G4306
FARRELL SELLERS No. 6-GA, 5/16" - 3" Capacity, 2 HP, Coolant GRINDERS, DRILL G5054
BALDOR DOUBLE-END PEDESTAL GRINDER GRINDERS, PEDESTAL TYPE G7044
24" x 40" VANGUARD No. M7160/CK-GM, 2007 GRINDERS, SURFACE, RECIPROCATING TABLE, (Horizontal Spindle) G8025
8" x 16" KENT No. KGS-250AH, 2-Axis Hyd., Perm. Chuck, Coolant, Clean GRINDERS, SURFACE, RECIPROCATING TABLE, (Horizontal Spindle) G8025
12" x 24" SHARP No. SH-1124, 2-Axis Hyd., EMC, Coolant, 3 HP, Clean GRINDERS, SURFACE, RECIPROCATING TABLE, (Horizontal Spindle) G8025
12" x 32" JAKOBSEN No. SJ16, Hyd., Incr. Down Feed, Elect Chuck, Low Price GRINDERS, SURFACE, RECIPROCATING TABLE, (Horizontal Spindle) G8025
8" x 18" CHEVALIER No. FSG-818AD, 3-Axis GRINDERS, SURFACE, RECIPROCATING TABLE, (Horizontal Spindle) G8025
10" x 20" CHEVALIER No. FSG-3A1020, 3-Axis, Coolant, 1999, Clean GRINDERS, SURFACE, RECIPROCATING TABLE, (Horizontal Spindle) G8025
40" x 80" SUPERTEC No. OA-4079, 3-Axis, PLC Control,, 15 HP Spdl., 2010, Nice GRINDERS, SURFACE, RECIPROCATING TABLE, (Horizontal Spindle) G8025
No. B-24 Arter, 25" Chuck, Tilt Table, 20" Wheel, 10 HP GRINDERS, SURFACE, ROTARY TYPE, (Horizontal Spindle) G8080
36" BLANCHARD No. 18-36, 20" Segment Wheel, 25 HP, Wet Base, Just Removed From Service, Low Price GRINDERS, SURFACE, ROTARY TYPE, (Vertical Spindle) G8100
42" MATTISON, No. 24-42, 22" Wheel, 75 HP, External Coolant, Nice, Low Price GRINDERS, SURFACE, ROTARY TYPE, (Vertical Spindle) G8100
42", MATTISON, No. 42, 48" Swing, 75 HP, 22" Seg. Wheel, 24" Vert., Ext. Coolant GRINDERS, SURFACE, ROTARY TYPE, (Vertical Spindle) G8100
ELITE, No. AR5E, Tool & Cutter Grinder GRINDERS, TOOL & CUTTER - See Also G4175, G6254 G8500
2 Ton P & H Hevi-Lift, Low Headroom, 7/20 FPM, 35' Lift, Pendant, Low Price HOISTS, ELECTRIC - See Also C6306 H5204
2 Ton P & H Hevi-Lift, Low Headroom, 7/20 FPM, 35' Lift, Pendant, Low Price HOISTS, ELECTRIC - See Also C6306 H5204
2 Ton HADEF, Pendant, Chain Bag, 11' Lift, Nice HOISTS, ELECTRIC - See Also C6306 H5204
1/4 Ton, BUDGIT ELECTRIC CHAIN HOIST HOISTS, ELECTRIC - See Also C6306 H5204
3 Ton, YALE HOISTS, ELECTRIC - See Also C6306 H5204
2 Ton, BUDGIT HOISTS, ELECTRIC - See Also C6306 H5204
1 Ton, BUDGIT, 16 FPM, Chain Bucket, Pendant Control, 1 HP HOISTS, ELECTRIC - See Also C6306 H5204
1 Ton, YALE HOISTS, ELECTRIC - See Also C6306 H5204
3 Ton P & H ZIP III, Electric, 8 FPM Lift, Pendant, Chain Bag, Nice, (2) Available HOISTS, ELECTRIC - See Also C6306 H5204
2 Ton C/M Lodestar Chain Hoist, Model R, 8 FPM, Pendant Control, Hook Mount, 1 HP HOISTS, ELECTRIC - See Also C6306 H5204
1 Ton Budgit Electric Chain Hoist HOISTS, ELECTRIC - See Also C6306 H5204
1/4 Ton Coffing Electric Chain Hoist HOISTS, ELECTRIC - See Also C6306 H5204
1/4 Ton Budget Electric Chain Hoist HOISTS, ELECTRIC - See Also C6306 H5204
3 Ton, BUDGIT, No. 905482,Trolley,I Beam Mount,Fits 9" to 11" Beam HOISTS, TROLLEY H5751
3 Ton, BUDGIT, No. 905482,Trolley,I Beam Mount,Fits a 9" to 11" Beam HOISTS, TROLLEY H5751
1 Metric Ton Ingersoll-Rand Hoist HOISTS, TROLLEY H5751
1 Ton Aro Trolley HOISTS, TROLLEY H5751
No. MBB-1600 SUNNEN, .060" to 6" I.D. Range, 200-1600 RPM, 1/2 HP, Tooling HONES, HORIZONTAL - See Also S8454 H5975
Superior Hone, No. 12WR, SN. 3-7808 HONES, VERTICAL - See Also S8454 H6004
Auto-Sert INSERTION MACHINES I4775
110 Ton Spartan Ironworker IRONWORKERS - See P8915 I6200
Groen Steam Kettle KETTLES - See Also K1972, R0803 K1951
1-1/4"W x 9"L MORRISON, 1/16" to 1-1/4" Cap., 24" x 27" Tbl., 2 HP, 1995 KEYSEATERS K3004
1-1/2" x 12" DAVIS No. 15, 4-1/2" Str., 20" x 31" Tbl., 2 HP KEYSEATERS K3004
1-1/4" MITTS & MERRILL "Giant", No. 2, 1-1/4"W x 12"L Capacity, As-Is, Low Price KEYSEATERS K3004
3" MORRISON, 14" Max. Length, Hyd., Auto Feed, Factory Reconditioned KEYSEATERS K3004
1-1/4" W. x 9" L., MORRISON, No. 1-1/4, New KEYSEATERS K3004
Mazak Slant Turn 35N-ATC M/C, Mazatrol T32-3, 16 ATC, 30 HP, 1989, For Parts LATHES, COMBINATION, N/C & CNC L2150
OKUMA, LC40-2ST, 4-Axis, Twin Turret, 23" Swing, 2500 RPM, 3.5" Bore,Tailstock, OSP3000L Control, 60 HP, 1982, Clean LATHES, COMBINATION, N/C & CNC L2150
SUMMIT No. SCT14, 14" Swg, 7.5" OCS, 4000 RPM, 8 Pos. Turret, Fagor 8055 Cntrl, New LATHES, COMBINATION, N/C & CNC L2150
13" x 40" EMCO Maximat V13, Inch, mm, 30-2500 RPM, 3 HP LATHES, ENGINE - (See Also Other Lathe Categories) L3000
22" x 72" Leblond Regal, 38-1080 RPM, Chucks, 10 HP LATHES, ENGINE - (See Also Other Lathe Categories) L3000
16" x 30" American Pacemaker, Heavy Duty, 25-1500 RPM, Clean, Low Price LATHES, ENGINE - (See Also Other Lathe Categories) L3000
36" x 36" Leblond Lathe, Factory Raised, 24" 4-Jaw Chuck, Taper, 5 HP LATHES, ENGINE - (See Also Other Lathe Categories) L3000
19" x 78" LEBLOND MAKINO, Servo-Shift 40-1600 RPM, 3" Hole, Inch/mm, Reconditioned 2019 LATHES, ENGINE - (See Also Other Lathe Categories) L3000
19" x 102" Leblond LATHES, ENGINE - (See Also Other Lathe Categories) L3000
18"/28" x 80" Jet No. 1880, Gap Bed, Inch/mm, S.R., 5 HP LATHES, ENGINE - (See Also Other Lathe Categories) L3000
13" x 40" STANDARD-MODERN No. 1340, 40-2000 RPM, Inch/mm, 3 HP LATHES, ENGINE - (See Also Other Lathe Categories) L3000
25"/34" x 80" Sharp No. 2580, 14-1500 RPM, Inch/mm, 3" Hole, 10 HP LATHES, ENGINE - (See Also Other Lathe Categories) L3000
16" x 33" South Bend, 30-980 RPM, 2 HP, Low Price LATHES, ENGINE - (See Also Other Lathe Categories) L3000
15" CLAUSING COLCHESTER, For Parts LATHES, ENGINE - (See Also Other Lathe Categories) L3000
22"/31" x 120" TOS No. SN 55B, Gap Bed, Inch/mm, 10-1000 RPM, 3" Hole, 10 HP LATHES, ENGINE - (See Also Other Lathe Categories) L3000
15" x 102" Leblond Regal, 45-1800 RPM, Taper, S.R., Clean LATHES, ENGINE - (See Also Other Lathe Categories) L3000
27" x 84" MONARCH 24" N, 405 RPM, Taper, Chucks, 25 HP, Low Price LATHES, ENGINE - (See Also Other Lathe Categories) L3000
15"/23" x 50" CLAUSING COLCHESTER, Gap Bed, 25-2000 RPM, Inch/mm, DRO, 1998, Nice LATHES, ENGINE - (See Also Other Lathe Categories) L3000
17" x 60" CLAUSING COLCHESTER, Parts Machine LATHES, ENGINE - (See Also Other Lathe Categories) L3000
37" x 120" LODGE & SHIPLEY, 29" OCS, 8-1016 RPM, 40 HP LATHES, ENGINE - (See Also Other Lathe Categories) L3000
25" x 66" TOOLMEX No. TUR630M, Inch/mm, 4" Hole, Taper, 20 HP, 1994 LATHES, ENGINE - (See Also Other Lathe Categories) L3000
26" x 60" LEBLOND Regal, 38-1500 RPM, Taper, 10 HP, Low Price LATHES, ENGINE - (See Also Other Lathe Categories) L3000
40" x 132" MONARCH Series 90, 25" OCS, 6-750 RPM, 4" Hole, 40 HP, Clean LATHES, ENGINE - (See Also Other Lathe Categories) L3000
17"/25" x 65" CLAUSING METOSA Gap Lathe, 40-2200 RPM, 7-1/2 HP, Clean LATHES, ENGINE - (See Also Other Lathe Categories) L3000
21" x 60" CLAUSING COLCHESTER, 1400 RPM, Inch/mm, 3.5" Hole, Clean LATHES, ENGINE - (See Also Other Lathe Categories) L3000
21" x 100" CLAUSING COLCHESTER LATHES, ENGINE - (See Also Other Lathe Categories) L3000
21"/30" x 84", TA SHING, Gap Bed, Inch/mm, 11-1500 RPM, 3" Hole, Taper, S.R., Coolant LATHES, ENGINE - (See Also Other Lathe Categories) L3000
32" x 72" LODGE & SHIPLEY Powerturn, 27" OCS, 1000 RPM, (2) S.R., 30 HP LATHES, ENGINE - (See Also Other Lathe Categories) L3000
14"/22" x 40" WILLIS, Gap Bed, 70-2000 RPM, Inch/mm, 5 HP, New LATHES, ENGINE - (See Also Other Lathe Categories) L3000
16"/25" x 80" SUMMIT, Gap, 20-2000 RPM, Inch/mm, 3" Hole, Taper, S.R., 10 HP, New LATHES, ENGINE - (See Also Other Lathe Categories) L3000
20"/27" x 80" SUMMIT, Gap Bed, Inch/mm, 11-1400 RPM, 4-1/8" Hole, 10 HP, New LATHES, ENGINE - (See Also Other Lathe Categories) L3000
20"/27" x 60" SUMMIT, Gap Bed, Inch/mm, 11-1400 RPM, 4-1/8" Hole, 10 HP, New LATHES, ENGINE - (See Also Other Lathe Categories) L3000
20"/30" x 80" SUMMIT, Gap Bed, Inch/mm, 32-1500 RPM, 4" Hole, 10 HP, New LATHES, ENGINE - (See Also Other Lathe Categories) L3000
One New Summit 20-4 x 60A Precision Engine Lathe LATHES, ENGINE - (See Also Other Lathe Categories) L3000
14"/22" x 40" WILLIS No. 1440, Gap, Inch/mm, New LATHES, ENGINE - (See Also Other Lathe Categories) L3000
14"/20" x 40" SUMMIT, Gap, Inch/mm, New LATHES, ENGINE - (See Also Other Lathe Categories) L3000
16"/25" x 60" SUMMIT, Gap, 20-2000 RPM, Inch/mm, 3" Hole, Taper, S.R., 10 HP, New LATHES, ENGINE - (See Also Other Lathe Categories) L3000
25"/32" x 120" SUMMIT, Gap Bed, Inch/mm, 20-1250 RPM, 4-1/8" Hole, 15 HP, New LATHES, ENGINE - (See Also Other Lathe Categories) L3000
26"/35" x 80", SUMMIT, Gap Bed, Inch/mm, 13-800 RPM, 6-1/8" Hole, 20 HP, New LATHES, ENGINE - (See Also Other Lathe Categories) L3000
14" x 40" WILLIS Engine Lathe, New, Must Be Ordered LATHES, ENGINE - (See Also Other Lathe Categories) L3000
FEELER No. SOM-510 Series II, 230-3500 RPM, Lot Of Tooling, Clean LATHES, SECOND OPERATION - See Also L4304 L4805
No. 3 WARNER & SWASEY M-1200, BAR FEED JUST TAKEN FROM SERVICE LATHES, TURRET, RAM TYPE L6249
No. 5 WARNER & SWASEY No. M-4660, 20" Swing, 20 HP, 1968, Low Price LATHES, TURRET, RAM TYPE L6249
No. 5 WARNER & SWASEY M-2250, Sq. Head, Collet Chuck, Bar Feed. 15 HP LATHES, TURRET, RAM TYPE L6249
No. 5A WARNER & SWASEY, Sq. Head, 9-1/2" Hole, 32" 3-Jaw, 75 HP LATHES, TURRET, SADDLE TYPE L6304
66" x 1-3/4", BLAW KNOX / AETNA, 21 Roll, Triple Backed Up, 25 HP, 1967 LEVELERS, ROLLER, PLATE, (Stretch) - See Also S8005 L6954
VESTIL POWER PALLET JACK LIFT TRUCKS - See T6298 L7204
2000 Lb. Econo Lift Straddle Lifter, Portable Tote Box Lifter, Hyd. Tilt, 42" Forks, 2016 LIFTERS - See Also S4553 L7225
SOUTHWORTH MANUAL LIFT TABLE LIFTERS - See Also S4553 L7225
SOUTHWORTH MANUAL LIFT TABLE LIFTERS - See Also S4553 L7225
PRESTO PNEUMATIC LIFT TABLE LIFTERS - See Also S4553 L7225
PRESTO PNEUMATIC LIFT TABLE LIFTERS - See Also S4553 L7225
PRESTO PNEUMATIC LIFT TABLE LIFTERS - See Also S4553 L7225
Presto Pneumatic Lift Table LIFTERS - See Also S4553 L7225
12,000 Lb. SOUTHWORTH LST12-36, 48" x 144" Platform, 43" Raised, 7" Lowered LIFTERS - See Also S4553 L7225
6000 Lb. Pneumatic Lift Table, 60" x 80" Platform LIFTERS - See Also S4553 L7225
10,000 Lb. Pneumatic Lift Table LIFTERS - See Also S4553 L7225
2000 Lb. ECONOMY "Shoplifter" DX2, 54" Lift Height, 24" x 27" Platform, Casters LIFTERS - See Also S4553 L7225
6000 Lb. ECOA, Hyd. Lift/Tilt, 48" x 62" Platform, Pendant LIFTERS - See Also S4553 L7225
1000 Lb. SOUTHWORTH, Hyd., Lift & Tilt, 42" x 48" Platform, 1 Phase LIFTERS - See Also S4553 L7225
6000 Lb. ECOA, Hyd. Lift/Tilt, Pendant LIFTERS - See Also S4553 L7225
6000 Lb. VESTIL ULTT-5448-6-YEL, Hyd. Lift/Tilt, 54" x 48" Platform, Pendant, 2007 LIFTERS - See Also S4553 L7225
6000 Lb. ECOA, Hyd. Lift/Tilt, Pendant LIFTERS - See Also S4553 L7225
6000 Lb. ECOA, Hyd. Lift/Tilt, 60" x 65" Platform, 10" Lowered, Pendant LIFTERS - See Also S4553 L7225
2500 Lb. SOUTHWORTH PalletPal Roll-On Level Loader, Hyd., 28" Lift, 40" x 48" Platform LIFTERS - See Also S4553 L7225
LIFT TABLE, 24" x 48" LIFTERS - See Also S4553 L7225
2000 LBS. AMERICAN HYDRAULIC SCISSORS LIFT TABLE LIFTERS - See Also S4553 L7225
ECDA, 2000 Pound, 18" x 36", Power Lift Table LIFTERS - See Also S4553 L7225
3000 Lb. ECOA, Traveling Lift Table, 44" x 48" Plaform w/Rollers, 55" Raised, 20" Lowered LIFTERS - See Also S4553 L7225
2000 Lb., LEXCO WESCO, Die Handler w/30" x 36" Roller Top, Adjustable Height LIFTERS - See Also S4553 L7225
KITAMURA Mycenter 2X, 20" x 14" x 18", 7K RPM, 20 ATC, Chip Conveyor, Clean MACHINING CENTERS, VERTICAL, N/C & CNC - See Also M2833 M0185
39.4"X, 20"Y, 18"Z Mazak Bridge Type Vertical Machining Center MACHINING CENTERS, VERTICAL, N/C & CNC - See Also M2833 M0185
Hurco BMC4020/SSM, 40"X, 20"Y, 24"Z, 8K RPM, Ultimax 3 Dual Screen Control, 1996 MACHINING CENTERS, VERTICAL, N/C & CNC - See Also M2833 M0185
No. 175, SCHMIDT, Hyd., 8" Die Space, 10" B.H., 3 HP, Clean MARKING MACHINES - See Also W5956 M0753
No. 365 SCHMIDT, Hyd., 4 Tons, 18" Die Space, 10" B.H., 2 Lines of 1/4", Clean MARKING MACHINES - See Also W5956 M0753
No. 175 SCHMIDT, Hyd MARKING MACHINES - See Also W5956 M0753
No. 175 SCHMIDT, Hyd MARKING MACHINES - See Also W5956 M0753
No. 175 SCHMIDT, Hyd MARKING MACHINES - See Also W5956 M0753
365 Schmidt Marking Machine MARKING MACHINES - See Also W5956 M0753
365 Schmidt Marking Machine MARKING MACHINES - See Also W5956 M0753
Belt Conveyor: 22"W x 16'L HYTROL, Power, Adjustable Height MATERIAL HANDLING EQUIPMENT - (See Also Specific Categories) M0798
Winch/Tripod System, DBI/SALA Salalift L1850, 7' Tripod, Winch MATERIAL HANDLING EQUIPMENT - (See Also Specific Categories) M0798
CABINET: STANLEY VIDMAR, Single Door w/Shelf, 30"W x 27-3/4"D x 44"H MATERIAL HANDLING EQUIPMENT - (See Also Specific Categories) M0798
Dump Hopper MATERIAL HANDLING EQUIPMENT - (See Also Specific Categories) M0798
Safe MATERIAL HANDLING EQUIPMENT - (See Also Specific Categories) M0798
Die cart MATERIAL HANDLING EQUIPMENT - (See Also Specific Categories) M0798
1500 Lb. Hamilton Die Table MATERIAL HANDLING EQUIPMENT - (See Also Specific Categories) M0798
2,000 Lb. Hamilton Die Table MATERIAL HANDLING EQUIPMENT - (See Also Specific Categories) M0798
HAMILTON DIE TABLE MATERIAL HANDLING EQUIPMENT - (See Also Specific Categories) M0798
10,500 # 1 Lot Chain (Slings) MATERIAL HANDLING EQUIPMENT - (See Also Specific Categories) M0798
STORAGE CABINET: ROUSSEAU, 4 Drawer, 30"W x 27-1/2"D x 28"H, Nice MATERIAL HANDLING EQUIPMENT - (See Also Specific Categories) M0798
No. PALLET JACK MATERIAL HANDLING M1300
No. PALLET JACK MATERIAL HANDLING M1300
No. PALLET JACK MATERIAL HANDLING M1300
No. PALLET JACK MATERIAL HANDLING M1300
No. PALLET JACK MATERIAL HANDLING M1300
Tabar, Dumper, Hyd. MATERIAL HANDLING M1300
NU-STAR, POWER PUSHER, No. STANDARD DUTY,4000 Lbs. of Push Cap., Pneumatic Tires MATERIAL HANDLING M1300
No. 25HP-5CK Kearney & Trecker, 18" x 94" Tbl., 50" Long. Travel, 13-1300 RPM, 25 HP MILLERS, PLAIN, HORIZONTAL M1974
2MI CINCINNATI HORIZONTAL MILLING MACHINE MILLERS, PLAIN, HORIZONTAL M1974
2MI CINCINNATI MILLING MACHINE/ TOOL MAKERS OVER ARM MILLERS, PLAIN, HORIZONTAL M1974
No. 2 MI CINCINNATI MILLERS, PLAIN, HORIZONTAL M1974
No. 2 U.S. Burke/Morrison, 50-2370 RPM, 8" x 32" P.F. Tbl., 2 HP, Coolant, Factory Rebuilt MILLERS, PRODUCTION, (Simplex) - See Also M1698, M1725 M2198
DOALL COMBINATION VERTICAL/HORIZONTAL MILLING MACHINE MILLERS, RAM TYPE, HORIZ & VERT, (Swivel Hd) - See Also M1974, M1670 M2371
Hartford, 9" x 42" Tbl., 80-2720 RPM, R-8, DRO, 2 HP, Low Price MILLERS, VERTICAL M2824
CHEVALIER No. FM-3VKH, 3 HP, V-Speed, 10" x 50" PF Tbl., R-8, DRO, Nice MILLERS, VERTICAL M2824
BRIDGEPORT Series I, 9" x 48" P.F. Table, 2 HP V-Speed, DRO, Clean MILLERS, VERTICAL M2824
BRIDGEPORT/SUPERMAX, 9" x 42" P.F. Tbl., 1-1/2 HP Vari-Speed MILLERS, VERTICAL M2824
BRIDGEPORT Series I, 9" x 42" Tbl., 2 HP Vari-Speed, Clean MILLERS, VERTICAL M2824
No. 3 CINCINNATI, 18-1300 RPM, 15" x 62" Tbl., 16" Cross, 50 Tpr, 10 HP MILLERS, VERTICAL M2824
CMS Drill-Mill MILLERS, VERTICAL M2824
SERIES II, BRIDGEPORT, 11" x 58" Tbl, Pwr Quill Feed, 4 HP, 1986, Clean MILLERS, VERTICAL M2824
BRIDGEPORT Series II, 11" x 58" Tbl., 40 Tpr, Pwr Quill Feed, 4 HP MILLERS, VERTICAL M2824
BRIDGEPORT Series II, 11" x 58" Tbl., 40 Tpr, Pwr Quill Feed, 4 HP MILLERS, VERTICAL M2824
Bridgeport Vertical Milling Machine MILLERS, VERTICAL M2824
SUPERMAX No. YCM-16VS, 3 HP Vari-Speed, 9" x 49" PF Tbl, R-8, DRO MILLERS, VERTICAL M2824
NIIGATA VERTICAL MILLING MACHINE MILLERS, VERTICAL M2824
WILLIS No. 1050, 10" x 50" Tbl., V-Speed, R-8, 3 HP, New MILLERS, VERTICAL M2824
SUMMIT EVS-350B, 3 HP V-Speed 0-4300 RPM, 10" x 50" Table R-8, Coolant, New MILLERS, VERTICAL M2824
SUMMIT EVS-349B, 3 HP V-Speed 60-4200 RPM, 9" x 49" Table R-8, Coolant, New MILLERS, VERTICAL M2824
SUMMIT VS-350B, 3 HP V-Speed 60-4200 RPM, 10" x 50" P.F. Table R-8,Box Ways, Coolant, New MILLERS, VERTICAL M2824
SUMMIT VS 550B, 5 HP V-Speed 80-3500 RPM, 11" x 52" Tbl, 40 Tpr, ,Box Ways, Coolant, New MILLERS, VERTICAL M2824
Willis 1250II-3MP, 5 HP, 60-4200 RPM, 12" x 50" Tbl, 40 Tpr, Box Ways, Acu-Rite CNC Control, New MILLERS, VERTICAL/UNIVERSAL, N/C & CNC - See Also M0185 M2833
SUMMIT SmartCut EVS 550B, 3-Axis, 5 HP V-Speed 70-3800 RPM, 11" x 52" Tbl, 40 Tpr, Box Ways, Coolant, Fagor 8055MC Control, New MILLERS, VERTICAL/UNIVERSAL, N/C & CNC - See Also M0185 M2833
SUMMIT SmartCut EVS-350B, 3-Axis, 3 HP V-Speed 0-4300 RPM, 10" x 50" Table R-8, Fagor 8055MC, Coolant, New MILLERS, VERTICAL/UNIVERSAL, N/C & CNC - See Also M0185 M2833
LAGUN, No. MILLMATIC II, ANILAM, MILLERS, VERTICAL & HORIZ, N/C & CNC M2836
DISTI DW-50 SOLVENT RECOVERY SYSTEM MISCELLANEOUS M3203
McBride Laminator System, For Foam MISCELLANEOUS M3203
RO-TAB TESTING SIEVE SHAKER MISCELLANEOUS M3203
HOBART S.S. FOOD CHOPPER MISCELLANEOUS M3203
GARDALL SAFE MISCELLANEOUS M3203
GARDALL SAFE MISCELLANEOUS M3203
GARDALL SAFE MISCELLANEOUS M3203
PRISM NITROGEN SYSTEM, Model 2040 MISCELLANEOUS M3203
DRI-STEEM GAS-TO-STEAM HUMIDIFIER MISCELLANEOUS M3203
HARDINGE CONICAL BALL MILL MISCELLANEOUS M3203
ARO SPRAY PUMP 3 GUNS MISCELLANEOUS M3203
GT Exhaust, Critical Grade Silencer, Model: 201-5108-2 MISCELLANEOUS M3203
Reel Craft Spring Retractable Air Hose Reel MISCELLANEOUS M3203
DOUGHTON HOSE REEL MISCELLANEOUS M3203
REELCRAFT SPRING RETRACTABLE FUEL HOSE REEL MISCELLANEOUS M3203
REELCRAFT Spring Retractable Air Hose Reel MISCELLANEOUS M3203
REELCRAFT SPRING RETRACTABLE OIL HOSE REEL MISCELLANEOUS M3203
Hose Reel MISCELLANEOUS M3203
Hose Reel MISCELLANEOUS M3203
Hose Reel MISCELLANEOUS M3203
Hose Reel MISCELLANEOUS M3203
Reelcraft Spring Retractable Air Hose Reel MISCELLANEOUS M3203
REELCRAFT SPRING RETRACTABLE AIR HOSE REEL MISCELLANEOUS M3203
DOUGHTON SPRING RETRACTABLE AIR HOSE REEL MISCELLANEOUS M3203
Reel Craft Oil Hose Reel MISCELLANEOUS M3203
MC DOUGHTON AIR HOSE REEL MISCELLANEOUS M3203
REELCRAFT SPRING RETRACTABLE AIR HOSE REEL MISCELLANEOUS M3203
Doughton Hose Reel MISCELLANEOUS M3203
Doughton Hose Reel MISCELLANEOUS M3203
36" Motorized Damper, Aluminum, Model: 3C131E MISCELLANEOUS M3203
McMaster-Carr Heavy Duty Wall Louver 36x36" opening, (8) Slats MISCELLANEOUS M3203
100% BGF E-Glass Fiber Techmat, Style: 4003, Roll Length: 75 ft, (8) Boxes Available MISCELLANEOUS M3203
100% BGF E-Glass Fiber Techmat, Style: 4003, Roll Length: 75 ft, (8) Boxes Available MISCELLANEOUS M3203
100% BGF E-Glass Fiber Techmat, Style: 4003, Roll Length: 75 ft, (8) Boxes Available MISCELLANEOUS M3203
CALDYN, No. RJB511T, Max. Load:511 (lbs.), (4)Available MISCELLANEOUS M3203
CALDYN, No. RJB511T, Max. Load:511 (lbs.), (4)Available MISCELLANEOUS M3203
CALDYN, No. RJB511T, Max. Load:511 (lbs.), (4)Available MISCELLANEOUS M3203
CALDYN, No. RJC2120T, Max. Load 2120 Lbs., (2) Available, New/Never Used MISCELLANEOUS M3203
Actionjac, Ball Screw Jacs, Worm Gear Screw Jack, 1 Ton High Lead, New, (6) Available MISCELLANEOUS M3203
CALDYN TJE6080T,Spring Isolation Mount: Color-Black w/4 Gray Spring (2)Available MISCELLANEOUS M3203
CALDYN TJE6080T,Spring Isolation Mount: Color-Black w/4 Gray Spring (2)Available MISCELLANEOUS M3203
CALDYN, No.RJB511T, Max. Load:511(lbs.) (4)Available MISCELLANEOUS M3203
CALDYN,NO. RJC2120T, Max Load: 2120 Lbs., (2)Available New/Never Used MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: Color-Green w/ yellow springs, (3) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: (6) Available, Color: Blue w/ purple springs MISCELLANEOUS M3203
22 KVA, SQUARE D, Pri 480, 208Y/120 Sec., MPZ22T2F Mini Power Zone, Never Used MISCELLANEOUS M3203
30 KVA, SQUARE D, Pri 480, 208Y/120 Sec, MPZ30T2F, Mini Power Zone, Never Used MISCELLANEOUS M3203
22.5 KVA, SQUARE D, Pri 480, 208Y/120 Sec., MPZ22T2F Mini Power Zone, Never Used MISCELLANEOUS M3203
RADIATOR: IEA No. EC046S272, 72" Diameter Fan, Unused MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, Gray w/ orange & gray springs, (10) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, Gray w/ orange & gray springs, (10) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, Gray w/ orange & gray springs, (10) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, Gray w/ orange & gray springs, (10) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, Gray w/ orange & gray springs, (10) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, Gray w/ orange & gray springs, (10) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, Gray w/ orange & gray springs, (10) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, Gray w/ orange & gray springs, (10) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, Gray w/ orange & gray springs, (10) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, Color-Black w blue springs, (2) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, SPG MTG LKE-56, Gray with 4 purple springs, (6) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, SPG MTG LKE-56, Gray with 4 purple springs, (6) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, SPG MTG LKE-56, Gray with 4 purple springs, (6) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, SPG MTG LKE-56, Gray with 4 purple springs, (6) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, SPG MTG LKE-56, Gray with 4 purple springs, (6) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: (6) Available, Color: Blue w/ purple springs MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: (6) Available, Color: Blue w/ purple springs MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: (6) Available, Color: Blue w/ purple springs MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: (6) Available, Color: Blue w/ purple springs MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: (6) Available, Color: Blue w/ purple springs MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: Color-Green w/ yellow springs, (3) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: Color-Green w/ yellow springs, (3) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: Cali. Dynamics, Model: RJJEQA3920 (4) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: Cali. Dynamics, Model: RJJEQA3920 (4) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: Cali. Dynamics, Model: RJJEQA3920 (4) Available MISCELLANEOUS M3203
CALDYN TJE6080T,Spring Isolation Mount: Color-Black w/4 Gray Spring (2)Available MISCELLANEOUS M3203
Sensor, No. XT800-3-ss-bn-c-1/4-15-06200-j-h, 17-3/4" threads, (4) Available MISCELLANEOUS M3203
Sensor, No. XT800-3-ss-bn-c-1/4-15-06200-j-h, 17-3/4" threads, (4) Available MISCELLANEOUS M3203
Sensor, No. XT800-3-ss-bn-c-1/4-15-06200-j-h, 17-3/4" threads, (4) Available MISCELLANEOUS M3203
Sensor, No. XT800-3-ss-bn-c-1/4-15-06200-j-h, 17-3/4" threads, (4) Available MISCELLANEOUS M3203
30" Aluminum Wall Shutter, Model: 3C309C MISCELLANEOUS M3203
42 1/2" Galvanized Wall Shutter, Model: 1C210C MISCELLANEOUS M3203
48" Galvanized Wall Shutter, Model: 1C211C MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, Color-Black w/ blue springs, Model: SPG MTG LKD-57 (2) Available MISCELLANEOUS M3203
KINETICS, Spring Isolation Mount, Type SM, Size:3500C, Rated Load:3500, (8) Available MISCELLANEOUS M3203
KINETICS, Spring Isolation Mount, Type SM, Size:3500C, Rated Load:3500, (8) Available MISCELLANEOUS M3203
KINETICS, Spring Isolation Mount,Type SM, Size:3500C, Rated Load:3500, (8) Available MISCELLANEOUS M3203
VMC, No. M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 Lb. Rating, Unused MISCELLANEOUS M3203
VMC, No. M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 Lb. Rating, Unused MISCELLANEOUS M3203
VMC, No. M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 Lb. Rating, Unused MISCELLANEOUS M3203
VMC, No. M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 Lb. Rating, Unused MISCELLANEOUS M3203
VMC, No. M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 Lb. Rating, Unused MISCELLANEOUS M3203
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused MISCELLANEOUS M3203
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused MISCELLANEOUS M3203
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused MISCELLANEOUS M3203
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused MISCELLANEOUS M3203
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused MISCELLANEOUS M3203
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available MISCELLANEOUS M3203
Actionjac, Ball Screw Jacs, Worm Gear Screw Jack, 1 Ton High Lead, New, (6) Available MISCELLANEOUS M3203
Actionjac, Ball Screw Jacs, Worm Gear Screw Jack, 1 Ton High Lead, New, (6) Available MISCELLANEOUS M3203
Actionjac, Ball Screw Jacs, Worm Gear Screw Jack, 1 Ton High Lead, New, (6) Available MISCELLANEOUS M3203
Actionjac, Ball Screw Jacs, Worm Gear Screw Jack, 1 Ton High Lead, New, (6) Available MISCELLANEOUS M3203
Actionjac, Ball Screw Jacs, Worm Gear Screw Jack, 1 Ton High Lead, New, (6) Available MISCELLANEOUS M3203
15 HP Leeson Motor, New,In-box. 1765 RPM, 3 phase, Frame 254T MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071, New-never used, in box. (24)Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071,New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071,New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071,New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071,New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071,New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler , No. M065071,New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071,New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071, New-never used, in box. (24)Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071, New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071,New-never used, in box. (24)Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071,New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071,New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071,New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071, New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071, New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071,New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071,New-never used, in box. (24) Available MISCELLANEOUS M3203
DONALDSON Muffler, No. M065071,New-never used, in box. (24) Available MISCELLANEOUS M3203
VMC, No. M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 Lb. Rating, Unused MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, SPG MTG LKE-56, Gray with 4 purple springs, (6) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: Cali. Dynamics, Model: RJJEQA3920 (4) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, Gray w/ orange & gray springs, (10) Available MISCELLANEOUS M3203
SPRING ISOLATION MOUNT: VMC, Color-Black w/ blue springs, Model: SPG MTG LKD-57 (2) Available MISCELLANEOUS M3203
4-1/2", ERCOLINA, No. EN180, 1-4-1/2", 0-60 Deg. Angle Range, 5.5 HP, New MISCELLANEOUS M3203
4", ERCOLINA, No. EN100, 1"-3" Dia., 0-60 Deg. Angle Range, 5 HP, New MISCELLANEOUS M3203
4", ERCOLINA EN100, 3" Maximum Diameter, 4" x 79" Belt, 0-60 Deg. Angle, 5 HP MISCELLANEOUS M3203
BLACK BROTHERS, Model PC2, 5 Gallon, Mixer, Oscillating Blades, Vertical, 115-230 60/1 MIXERS, PADDLE M3265
Hobart No. HCM-450 Vertical Cutter/Mixer, 45 Quart Stainless Steel Bowl MIXERS, SOLIDS - See Also M3249 M3277
Emco Cowles Disperser MIXERS, SOLIDS - See Also M3249 M3277
LIGHTIN,Md. No.316-Reg-153,15hp. 60/3 125rpm output.,13.97-1 ratio MIXERS, SOLIDS - See Also M3249 M3277
Teledyne Readco Laboratory Mixer 10 Qt. Lab. Mixer,S.S. MIXERS, SOLIDS - See Also M3249 M3277
125 Cu, Ft. Patterson-Kelly, Twin Shell, Dry Blender,50# per. cu. ft. MIXERS, SOLIDS - See Also M3249 M3277
350 HP. 888 RPM. 460/60/3 TEFC Motor Westinghouse MOTORS, A.C., SQUIRREL CAGE, 3 PHASE, (60 Cycle) M4553
5 HP, 1740 RPM, 230/460 V., Allis Chalmers, Frame 184T, Open Drip, (9) Motors MOTORS, A.C., SQUIRREL CAGE, 3 PHASE, (60 Cycle) M4553
5/32" x 8-7/8" x 8-7/8" BOSCHERT No. PN-4, Mechanical, Clean NOTCHING MACHINES N5230
TUBE & PIPE NOTCHER/GRINDER: SCOTCHMAN, No. AL100U-02, 3/4" - 3" Diameter, 4 HP, NEW NOTCHING MACHINES N5230
Pallet Rack PALLET RACKS P0255
Sturdi-Built Pallet Rack 18'x 36"W Uprights, 8' & 9' Beams Available PALLET RACKS P0255
Morris No. 403, Double End Buffer, 3000/1500 RPM, 3 HP POLISHING MACHINERY - (Including Buffers & Lathes, Buffing) P3454
Gardner No. 3CB, Double End Buffer, 5 HP POLISHING MACHINERY - (Including Buffers & Lathes, Buffing) P3454
Hammond POLISHING MACHINERY - (Including Buffers & Lathes, Buffing) P3454
HAMMOND No. 3-ROL, D.E., 47" Spindle Length, 3 HP POLISHING MACHINERY - (Including Buffers & Lathes, Buffing) P3454
HAMMOND No. 3-VROL-B, D.E., V-Speed 1200-2700 RPM, 47" Spindle Length, 3 HP POLISHING MACHINERY - (Including Buffers & Lathes, Buffing) P3454
Vibro-Dynamics Isolator Type Micro/Level Pads PRESS ACCESSORIES - See Also F0750, F0854 P3575
Vibro-Dynamics Isolator Type Micro/Level Pads PRESS ACCESSORIES - See Also F0750, F0854 P3575
Vibro-Dynamics Isolator Type Micro/Level Pads PRESS ACCESSORIES - See Also F0750, F0854 P3575
Vibro-Dynamics Isolator Type Micro/Level Pads PRESS ACCESSORIES - See Also F0750, F0854 P3575
Vibro-Dynamics Isolator Type Micro/Level Pads PRESS ACCESSORIES - See Also F0750, F0854 P3575
Vibro-Dynamics Isolator Type Micro/Level Pads PRESS ACCESSORIES - See Also F0750, F0854 P3575
Vibro-Dynamics Isolator Type Micro/Level Pads PRESS ACCESSORIES - See Also F0750, F0854 P3575
Vibro-Dynamics Isolator Type Micro/Level Pads PRESS ACCESSORIES - See Also F0750, F0854 P3575
Vibro-Dynamics Isolator Type Micro/Level Pads PRESS ACCESSORIES - See Also F0750, F0854 P3575
Vibro-Dynamics Isolator Type Micro/Level Pads PRESS ACCESSORIES - See Also F0750, F0854 P3575
Vibro-Dynamics Isolator Type Micro/Level Pads PRESS ACCESSORIES - See Also F0750, F0854 P3575
Vibro-Dynamics Isolator Type Micro/Level Pads PRESS ACCESSORIES - See Also F0750, F0854 P3575
5 Ton BTM Model P, Toggle, 1.5" Str., 9.25" S.H., PRESSES, AIR P3626
Conrac Presstaker, No. 020-B-SA500, 2" Stroke, 5" x 5" Bolster, 1 Phase PRESSES, AIR P3626
15 Ton AIRAM PulsAir No. PA15-0101, 4-Post, 3" Max. Stroke, 14.5" Die Height, 35" x 25" Bed, 2006, Excellent PRESSES, AIR P3626
Arbor Press PRESSES, ARBOR P3654
1-1/2 Ton DAKE No. 0, Lever Type, Bench Model PRESSES, ARBOR P3654
2 Ton GREENERD No. 2, Plain, Bench Model PRESSES, ARBOR P3654
5 Ton DAKE No. 3A1P, Ratchet, 10" Throat, 16" Over Table, Factory Stand PRESSES, ARBOR P3654
DAKE Arbor Press PRESSES, ARBOR P3654
150 Ton VERSON G2-150-96-36, 16" Str., 54" S.H., 36" x 96" Bed, A.C. PRESSES, GAP FRAME, (Double Crank) P4827
35 Ton V & O No. 35-ST, 2" Str. PRESSES, GAP FRAME, (Single Crank) - See Also P6185, P6209 P4834
20 Ton CHIN FONG No. CAF-20H, 1.18" Str., 7.6" S.H., 200-400 SPM, 20" x 12" Bed, 2005 PRESSES, GAP FRAME, (Single Crank) - See Also P6185, P6209 P4834
20 Ton CHIN FONG No. CAF-20H, 1.18" Str., 7.6" S.H., 200-400 SPM, 20" x 12" Bed, 2006 PRESSES, GAP FRAME, (Single Crank) - See Also P6185, P6209 P4834
20 Ton CHIN FONG No. CAF-20H, 1.18" Str., 7.6" S.H., 200-400 SPM, 20" x 12" Bed, 2006 PRESSES, GAP FRAME, (Single Crank) - See Also P6185, P6209 P4834
22 TON PERKINS No. 22-S, 2" Str., 7" S.H., 22" x 12" Bed, 200-800 SPM, Nice PRESSES, GAP FRAME, (Single Crank) - See Also P6185, P6209 P4834
15 Ton PERKINS No. 15-S, 1.5" Str., 7.75" S.H, 20" x 10" Bed, V-Speed, 1982 PRESSES, GAP FRAME, (Single Crank) - See Also P6185, P6209 P4834
15 Ton PERKINS No. 15-S, 1.5" Str., 7.75" S.H, 20" x 10" Bed, 100-300 SPM, 1981 PRESSES, GAP FRAME, (Single Crank) - See Also P6185, P6209 P4834
15 TON PERKINS No. 15-S, 1-1/2" Str., 7.75" S.H., 20" x 10" Bed, 100-300 SPM, 1981 PRESSES, GAP FRAME, (Single Crank) - See Also P6185, P6209 P4834
22 TON PERKINS No. 22-S, 2" Str., 7" S.H., 22" x 12" Bed, V-Speed 100-400 SPM, Clean PRESSES, GAP FRAME, (Single Crank) - See Also P6185, P6209 P4834
45 Ton KOMATSU No. OBS45, 3.9"Str, 9.8" SH, 80 SPM, 27" x 17" Bed, 1979, Clean PRESSES, GAP FRAME, (Single Crank) - See Also P6185, P6209 P4834
25 Ton ROUSSELLE No. 25H, 3" Str., Adj. Bed, 14" x 20" Bed, 135 SPM, A.C. PRESSES, HORN P5051
200 Ton Nugier No. H200-14AP, Air Operated, 48" Between Uprights, 14" Stroke, Clean PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
86 Ton METAL MUNCHER No. GB-9018, Gap Bed, 7" Stroke, 18" Throat, 11" x 48" Bed, 7-1/2 HP PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
10 Ton DAKE Force 10M, H-Frame, Manual, 20" B.H., 1997 PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
4 Ton Denison No. MC02, 6" Str., Bench Model, 3 HP PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
25 Ton DAKE Elec-Draulic I, 32" Between Uprights, 10" Stroke, 2 HP, Reconditioned 2018 PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
25 Ton ENERPAC No. IPH-2530, H-Frame, Manual, 14" Stroke, 29" B.H. PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
6 Ton MULTIPRESS No. RO65, Gap, 10" Str., 16" D.L., 5 HP PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
200 Ton DAKE/SICMI No. PMM, Movable Head & Frame, 79" x 98" Bed, 80" Between Uprights, 1999 PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
DAKE "C" FRAME HYDRAULIC PRESS PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
MULTIPRESS, Gap PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
12 Ton Multipress C Frame Hydraulic Press PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
16 Ton EITEL No. P16A, Gap, 16" Stroke, 21" D.L., 17" x 17" Bed, 9" Thr., Clean PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
10 Ton EITEL No. RP10, Gap PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
200 Ton DAKE Elec-Draulic II, H-Frame, 16" Str., 48" B.H., 7.5 HP, New PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
150 Ton DAKE Elec-Draulic II, H-Frame, 16" Str., 48" B.H., 10 HP, New PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
80 Ton DAKE Elec-Draulic II, H-Frame, 10" Str., 44" B.H., 10 HP, New PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
75 Ton DAKE Elec-Draulic II, H-Frame, 10" Str., 44" B.H., 2 HP, New PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
25 Ton DAKE Elec-Draulic II, H-Frame, 10" Str., 32" B.H., 2 HP, New PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
50 Ton DAKE Elec-Draulic II, H-Frame, 10" Str., 32" B.H., 2 HP, New PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
200 Ton DAKE Elec-Draulic I, 48" Between Uprights, 16" Stroke, 3 HP, New PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
150 Ton DAKE Elec-Draulic I, 48" Between Uprights, 16" Stroke, 2 HP, New PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
50 Ton DAKE Elec-Draulic I, 32" Between Uprights, 10" Stroke, 2 HP, New PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
150 Ton DAKE No. 150H, H-Frame, 48" Between Uprights, Adj. Bed, 8" Ram Travel, New PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
25 Ton DAKE No. 25H, H-Frame, Hand, 33" Between Uprights, New PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
75 DAKE Elec-Draulic I, 44" Between Uprights, 10" Stroke, 2 HP, New PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
50 Ton DAKE No. 50H, H-Frame, Hand, 32" Between Uprights, New PRESSES, HYDRAULIC - See Also P5904, P7275, P7626, P7898 P5102
16 Ton, EITEL Gap Frame Hydraulic Press, No. P16A, 15.75" Stroke, 7.87' Throat, 1974 PRESSES, HYDRAULIC, (Straightening) P5298
10 Ton Eitel Hydraulic Straightening Press PRESSES, HYDRAULIC, (Straightening) P5298
80 Ton L & J No. 7, 4" Str., 15-1/2" S.H., 38" x 24" Bed, A.C., Low Price PRESSES, O.B.I., BACK GEARED, (Single Crank) P6185
45 Ton BLISS No. C-45, 4" Str., 12" S.H., 29" x 18" Bed, A.C., 1973 PRESSES, O.B.I., BACK GEARED, (Single Crank) P6185
35 Ton V & O No. 35-ST, 2" Str., 1979 PRESSES, O.B.I., FLYWHEEL, (Single Crank) P6209
60 Ton Bliss No. C-60, 4" Str., 15.75" S.H., 90 SPM, 32" x 21" Bed, A.C. PRESSES, O.B.I., FLYWHEEL, (Single Crank) P6209
5 TON ALVA ALLEN No. BT5 PRESSES, O.B.I., FLYWHEEL, (Single Crank) P6209
27 Ton SOUTH BEND No. 27-FW-AC, 2.5" Str., 9-7/8" S.H., 160 SPM, A.C., 1983 PRESSES, O.B.I., FLYWHEEL, (Single Crank) P6209
CH-35 Bliss, 35 Ton Gap Frame Punch Press PRESSES, O.B.I., FLYWHEEL, (Single Crank) P6209
5 Ton ROUSSELLE No. OE, 1-1/4" Str., 9-1/4" S.H., 7" x 10" Bed, 3/4 HP PRESSES, O.B.I., FLYWHEEL, (Single Crank) P6209
40 Ton ROUSSELLE No. 4F, 4" Str., 11" S.H., 18" Throat, 105 SPM, 16" x 26" Bed, A.C., Clean PRESSES, O.B.I., FLYWHEEL, (Single Crank) P6209
45 Ton CLEARING Torc-Pac, 6" Stroke, 11" S.H. 60 SPM, 28" x 18" Bed, A.C. PRESSES, O.B.I., FLYWHEEL, (Single Crank) P6209
22 Ton BLISS No. C-22 PRESSES, O.B.I., FLYWHEEL, (Single Crank) P6209
60 Ton ROUSSELLE No. 6SS44, 4" Str., 26" S.H., 22" x 44" Bed, B.G., 50 SPM, A.C., Clean PRESSES, STRAIGHT SIDE, DOUBLE CRANK, (Single Action) P7135
1-Lot of Pumps PUMPS, MISCELLANEOUS P8598
Neslab Coolflow Liquid/Liquid Recirculator System II, Part # 323003260101, SN 90MML45840-60, 115 Volts, 60/Single Phase, Pump Type: PD-2 PUMPS, MISCELLANEOUS P8598
GA Spray equipment PUMPS, MISCELLANEOUS P8598
GA Spray equipment PUMPS, MISCELLANEOUS P8598
PRYCO, No. 397-12B, Fuel Pump, Never Used PUMPS, MISCELLANEOUS P8598
PRYCO, No. 397-12B, Fuel Pump PUMPS, MISCELLANEOUS P8598
Master Chemical, Yellow Belly Sump Sucker, Fluid Recycling System PUMPS, SUMP (Slurry) P8745
4" x 4" x 3/8" Edwards, 60 Ton, Hydraulic, Punch, Notcher, Shear, 2011 PUNCH-SHEARS, IRONWORKERS P8915
6" x 6" x 1/2" SCOTCHMAN No. 12012-24M, 120 Ton, Hyd, Punch, Bar, Angle, New PUNCH-SHEARS, IRONWORKERS P8915
3" x 3" x 5/16" Peddinghaus Peddiworker 400, 40 Ton, Hyd., Punch, Angle, Flat & Rod Shear, Coper/Notcher, Clean PUNCH-SHEARS, IRONWORKERS P8915
4" x 4" x 3/8" SCOTCHMAN No. 5014-ET, Hyd, 50 Ton, 3-Station Revolving Turret, 1 Phase, New PUNCH-SHEARS, IRONWORKERS P8915
4" x 4" x 3/8", SCOTCHMAN, No. 50514-EC, Hyd., 50 Ton, Punch, Bar Shear, Notcher, NEW PUNCH-SHEARS, IRONWORKERS P8915
6" x 6" x 1/2", SCOTCHMAN No. 12012-24M, 120 Ton, Hyd, Punch, Bar, Angle, New PUNCH-SHEARS, IRONWORKERS P8915
6" x 6" x 1/2", SCOTCHMAN, No. DO 95/140-24M, 95 Ton, Hyd, Dual Operator, New PUNCH-SHEARS, IRONWORKERS P8915
6" x 6" x 3/8", SCOTCHMAN, No.6509-24M, Hyd., Punch, Bar Shear, New PUNCH-SHEARS, IRONWORKERS P8915
6" x 6" x 1/2" SCOTCHMAN No. DO 8514-20M, 85 Ton, Hyd, Dual Operator, New PUNCH-SHEARS, IRONWORKERS P8915
6" x 6" x 1/2", SCOTCHMAN No. DO 120/200-24M, 120 Ton, Dual Operator, New PUNCH-SHEARS, IRONWORKERS P8915
6" x 6" x 1/2" SCOTCHMAN, No. DO 70/110-24M, 70 Ton, Dual Operator, New PUNCH-SHEARS, IRONWORKERS P8915
6" x 6" x 1/2", SCOTCHMAN, No. 12012-24M, 120 Ton, Hyd, Punch, Bar, Angle, New PUNCH-SHEARS, IRONWORKERS P8915
4" x 4" x 3/8" SCOTCHMAN No. 5014-ET, Hyd, 50 Ton, 3-Station Revolving Turret, New PUNCH-SHEARS, IRONWORKERS P8915
3" x 3" x 5/16" SCOTCHMAN PORTA-FAB 45, 45 Ton, Hyd, Punch, Angle & Bar Shear, New PUNCH-SHEARS, IRONWORKERS P8915
6" x 6" x 1/2" SCOTCHMAN Ironworker, No. FI8510-20M, Hyd., 85 Ton, Five Stations, New PUNCH-SHEARS, IRONWORKERS P8915
6" x 6" x 1/2", Scotchman No. 9012-24M, 90 Ton, Hyd., Punch, Bar Shear, NEW PUNCH-SHEARS, IRONWORKERS P8915
6" x 6" x 3/8" SCOTCHMAN, No. 6509-24M, Hyd., Punch, Bar Shear, New PUNCH-SHEARS, IRONWORKERS P8915
5 TON DIARCO POWER PUNCH PUNCHES, FABRICATING - See Also F0103 P8959
50 Ton PIERCE-ALL "Perf-O-Mator, 30" Throat, Duplicator, Tooling PUNCHES, FABRICATING - See Also F0103 P8959
HECK, No. 3C Trace-A-Punch, Duplicating Nibbler, 1/8" Capacity, 1.5 HP, 1 Phase PUNCHES, FABRICATING - See Also F0103 P8959
METAL MUNCHER SINGLE END HYDRAULIC PUNCH PUNCHES, SINGLE END, HYDRAULIC P9120
Whitney Hyd. Punch PUNCHES, SINGLE END, HYDRAULIC P9120
THE HENRY CORPORATION SINGLE END HYDRAULIC PUNCH PUNCHES, SINGLE END, HYDRAULIC P9120
30 Ton W.A. WHITNEY No. 627, Hyd., 36" Throat, Creonics Panelgage, Tooling, 10 HP PUNCHES, SINGLE END, HYDRAULIC P9120
1000 Lb. COIL-MATIC No. PR1854A, Pwr, 16" Width Capacity, 54" Max. O.D. , Low Price, As-Is REELS, CENTERING - See Also C3238, U4003 R1903
20 Ga. LOCKFORMER, 5 Station, Pittsburgh & Drive Cleat, 1 Phase ROLL FORMERS R4496
10 Stand FLAGLER HSCL, Pittsburgh, "S" Cleat, Drive Cleat, 5 HP Clean ROLL FORMERS R4496
8 STND, VICON, No. V-8, S & Drive Cleat, M & F Snaplock, 20 Ga., 5 HP, New ROLL FORMERS R4496
DD ROLLS, ANGLE BENDING R4704
3" x 3" KANE & ROACH ANGLE ROLL ROLLS, ANGLE BENDING R4704
4" X 4" ANGLE ROLL ROLLS, ANGLE BENDING R4704
3" x 3" x 3/8" ERCOLINA CE70H3, Hyd., Programmable, New ROLLS, ANGLE BENDING R4704
New Ercolina Mdl.CE50MR3, Manual Ring Roller ROLLS, ANGLE BENDING R4704
2-3/8" x 2-3/8" x 1/4" ERCOLINA No. CE50H3, Hyd., 2.5" Pipe, 3" Tube, Programmable, New ROLLS, BENDING & CURVING - See Also R5603 R4775
9' x 12-1/2" Diameter Top Roll, Three Roll Pyramid Type, Drop End ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
20' x 1/4" ROUNDO No. PS-320, , 3-Roll, Hyd., Digital Positioning Readouts, 1981, Clean ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
4' Carando, Tru-Circle, 20" Dia. x 38" L x 13 Ga. Capacity Mild Steel, Feed Table ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
48" x 16 Ga. PEXTO No. 418-E, Power, 3" Dia. Rolls, Initial, Stand, 2 HP, Clean ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
6' x 7/32" WDM No. B-6-72, Initial, Hyd., 6" Dia. H & P Rolls, 5 HP, New, In Stock ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
5' x 10 Ga. WDM No. B-5-60, Initial, Hyd., 5" Dia. Rolls, V-Speed, 3 HP, New, In Stock ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
36" x 14/16 Ga. PEXTO No. 3416-G, 3" Rolls, Power, Stand ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
8' x 5/16" WDM No. K-9-8, Initial, Hyd., 9" Rolls, 10 HP, 2016 ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
6' x 7/16" WDM No. 403-9-6, Four Roll, 9" Dia. H & P Rolls, 2015 In Stock ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
8' x 5/8" WDM No. 403-12-8, 4-Roll, Hyd., 12" Top Roll, 20 HP, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
10' x 1-3/4", WDM, No. 403-(25) 19-10, 4 Roll Hyd., , 19" Top Roll, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
10' x 19/32", WDM, No. 403-13-10, 4 Roll, Hyd., 13" Dia. Roll, New, I ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
5' x 1/4", WDM, No. 101-6-5, Hyd., 6" Dia. Rolls, 5 HP, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
4' x 16 Ga., TENNSMITH, No. SR48, Hand, 3" Dia. Rolls, Wire Grooves, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
5' x 5/16", WDM, No. 403-7-5, Hyd., Four Roll, 7" Diameter Rolls, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
4' x 1/2", WDM, No. K-8-4, Hyd., Init., 8" Dia. Rolls, 3-Roll Drive, 7.5 HP, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
5' x 24 Ga., WDM, No. B-2.6-60, V-Speed, Hardened Rolls, DRO, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
6' x 5/16", WDM, No. 101-7-6, Hyd, 7" Dia. Rolls, 3-Roll Drive, Cone Attach, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
6' x 1/4", WDM, No. 101-6-6, Hyd., 6" Dia. Rolls, 3-Roll Drive, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
12' x 1/4", WDM, No. 100-8J-12, Hyd., Pinch Pyramid, 8" Dia. Rolls, 7.5 HP, Demo ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
6' x 3/8", WDM, No. K-8-6, Hyd., Initial, 8" Dia. Rolls, 3-Roll Drive, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
10' x 1/2", WDM, No. K-12-10, Hyd., Initial, 3-Roll, 12" Rolls, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
10' x 1/2", WDM, No. 101-11-10, Hyd. Pinch Pyramid, 3-Roll, 11" Rolls, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
5' x 10 Ga., WDM, No. K-5-5, Hyd., Initial, 3-Roll Drive, Hardened Rolls, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
6' x 1/2", WDM, No. 100-9-6, Hyd. Pinch Pyramid, Side Supports, New, Made To Order ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
2'x 20 Ga, TENNSMITH, No. SR24, Initial, 3-Wire Grooves, Hand Roll, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
6' x 16" Ga., NATIONAL, No. NR7216, Power, 4" Dia. Rolls, 3-Roll Drive, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
4' x 16 Ga., NATIONAL, No. NR4816, Power, 3-Roll Drive, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
8' x 3/8", WDM, No. 100-9J-8, Hyd., 3-Roll, Vari-Speed, Pendant, DRO, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
10' x 14 Ga., WDM, No. B-6-120, Hyd., Three Roll, Swing-Out Top Roll, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
4' x 20 Ga., WDM, No. B-2.6-48, Hyd., V-Speed, Cone Attach, DRO, 3rd Roll Drive ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
5' x 1/4", WDM, Four Roll Double Pinch, Hyd., Pwr Drop End, DRO, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
4' x 8 Ga., WDM No. B-5-48, Initial Pinch, Hydraulic, 7 HP, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
4' x 12 Ga., WDM, No. B-4-48, Initial, 4" Dia. Rolls, Vari-Speed, 2 HP, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
4' x 12 Ga., WDM, No. B-4-48, Hyd., Initial, V-Speed, Cone Rolling Attach, 2004 ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
5' x 10 Ga., WDM, No. B-5-60, Initial, Hyd., 5" Dia. Rolls, 3 HP, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
10' x 10 Ga., WDM, No. 100-6-10, 3 Roll, Hyd., 6" Dia. Rolls, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
42", TENNSMITH, No. SR42 ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
3' x 22 Ga., TENNSMITH, No. SR36, Initial, 3 Wire Grooves, New ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) R5603
SPEEDY-CUT ABRASIVE SAW/WITH POWER OSCILLATING HEAD SAWS, ABRASIVE & FRICTION - See Also C8006 S0555
MAKITA ABRASIVE CHOP SAW SAWS, ABRASIVE & FRICTION - See Also C8006 S0555
20-22" EVERETT, 3" Solids, 7" Shapes, Power Down Feed, 20 HP, Clean SAWS, ABRASIVE & FRICTION - See Also C8006 S0555
20" TOLEDO "SPEED CUT" Abrasive Saw, 6" Shapes, 2-1/2" Solids Capacity, 10 HP SAWS, ABRASIVE & FRICTION - See Also C8006 S0555
No. CM-20, LECO SAWS, ABRASIVE & FRICTION - See Also C8006 S0555
13" Marathon, MC-325-PV, Airvise, Swivel, 2- Speed, 30-60 RPM, As-Is, Needs Repair SAWS, ABRASIVE & FRICTION - See Also C8006 S0555
12"/14", KALAMAZOO, No. K12-14W, 5 HP, Coolant, New SAWS, ABRASIVE & FRICTION - See Also C8006 S0555
20", KALAMAZOO, No. K20SW-15, Wet, 15 HP SAWS, ABRASIVE & FRICTION - See Also C8006 S0555
16" x 16" Amada No. HA-16S, 16" Rounds, 1-1/4" Blade, 7.5 HP SAWS, BAND, HORIZONTAL S0653
10" x 18" Kysor-Johnson Model J, 10" Rounds, 3/4" Blade, 3/4 HP, Low Price-As-Is SAWS, BAND, HORIZONTAL S0653
7" x 10" KALAMAZOO No. 7AW, 7" Rounds, Coolant, Clean SAWS, BAND, HORIZONTAL S0653
9" x 16" DOALL No. C-916, 105 to 275 FPM, 1" Blade, 2 HP, Coolant SAWS, BAND, HORIZONTAL S0653
12" x 12" DOALL No. C-305A, Auto. Bar Feed, 1-1/4" Blade, 5 HP SAWS, BAND, HORIZONTAL S0653
1270 WELLSAW HORIZONTAL BANDSAW SAWS, BAND, HORIZONTAL S0653
8" x 16" KALAMAZOO No. 8CW, 3/4" Blade, 1 HP SAWS, BAND, HORIZONTAL S0653
26" x 39" DOALL C-1000-650S, Miter, 26" Rounds, 10 HP, 1999 SAWS, BAND, HORIZONTAL S0653
9" x 11" VICTOR Auto-10H SAWS, BAND, HORIZONTAL S0653
10" x 12" DOALL No. C-260A, Auto. Feed, 1-1/4" Blade, 60-350 FPM, 5 HP, Clean SAWS, BAND, HORIZONTAL S0653
12" x 15" COSEN No. C-320NC, 12.8" Rounds, Auto. Feed, Dual Column, New SAWS, BAND, HORIZONTAL S0653
25" x 36" W.F. Wells No. B-25-1, 25" Rounds, 1-1/2" Blade, 5 HP SAWS, BAND, HORIZONTAL S0653
10" x 12" DOALL No. C-260A, Auto. Feed, 1-1/4" Blade, 60-350 FPM, 5 HP, Clean SAWS, BAND, HORIZONTAL S0653
14" x 20" HEM "Twister", Auto. Feed, Miter, 1-1/4" Blade, 5 HP, 2000 SAWS, BAND, HORIZONTAL S0653
16" x 25" HYD-MECH M-16A, Miter, Auto. Feed, 1-1/4" Blade, 7-1/2 HP, 2006 SAWS, BAND, HORIZONTAL S0653
12" x 13" COSEN No. C-320NC, 12.6" Rounds, Auto. Feed, Dual Column, Pwr Chip Conveyor, 2007 SAWS, BAND, HORIZONTAL S0653
10" x 16" WELLS No. 1000, 50-275 FPM, 1" Blade, 3/4 HP, Low Price SAWS, BAND, HORIZONTAL S0653
11" x 19" COSEN SH-500M, Miter, Semi-Auto, 1" Blade 3 HP, New, In Stock SAWS, BAND, HORIZONTAL S0653
9" x 11" Wellsaw No. 58BW, Horiz/Vert, 9" Rounds, 1 Phase, New SAWS, BAND, HORIZONTAL S0653
10" x 11" COSEN C-2, 10" Rounds, NC Auto. Feed, 1-1/4" Blade, New SAWS, BAND, HORIZONTAL S0653
13" x 20" COSEN C-510MNC, 14" Rounds, Programmable Miter & Auto. Feed, 1.25" Blade, 5 HP, New SAWS, BAND, HORIZONTAL S0653
16" x 21" COSEN SH-5542, Dual Column, Semi-Auto, 16" Rounds, 1.5" Blade, 7.5 HP, New SAWS, BAND, HORIZONTAL S0653
9" x 18" COSEN SH-460M, Miter, Semi-Auto, 1" Blade 2 HP, New SAWS, BAND, HORIZONTAL S0653
7" x 11" SCOTCHMAN SU-280, 8" Rounds, Miter, 1" Blade, 1.5 HP, Coolant, New SAWS, BAND, HORIZONTAL S0653
5" x 7" WELLSAW No. 57, Horiz/Vert, 5" Rounds, 1/2 HP, 1 Phase, New SAWS, BAND, HORIZONTAL S0653
13" x 20" COSEN No. C-510MNC, Auto., Miter, 14" Rounds, 1.25" Blade, New SAWS, BAND, HORIZONTAL S0653
15" x 25" COSEN No. C-650MNC, Auto., Miter, 16" Rounds, 1.5" Blade, New SAWS, BAND, HORIZONTAL S0653
10" x 10" COSEN C-260NC, Auto. Feed, 1-1/4" Blade, 5 HP, New SAWS, BAND, HORIZONTAL S0653
13" x 18" WELLSAW No. 1318SA, Semi-Auto., 13" Rounds, 70-375 FPM, 1" Blade, 3 HP, Wet, NEW SAWS, BAND, HORIZONTAL S0653
12" x 15" COSEN No. C-325NC, Auto. Feed, 12.8" Rounds, 1-1/4" Blade, New SAWS, BAND, HORIZONTAL S0653
9" x 14" COSEN No. MH-1016JA, 10" Rounds, 1" Blade, 2 HP, New SAWS, BAND, HORIZONTAL S0653
13" x 16" WELLSAW, No.1316S-SA, Semi-Automatic, Miter, 70-375 FPM, 1" Blade, Coolant, 3 HP, New SAWS, BAND, HORIZONTAL S0653
10" x 18" DAKE No. JH10W3, 10" Rounds, 50-270 FPM, 1" Blade, Coolant, 1 HP, New SAWS, BAND, HORIZONTAL S0653
6" x 13" WELLSAW No. 613, 50-250 FPM, 1 HP, 3/4" Blade, Coolant, New SAWS, BAND, HORIZONTAL S0653
13" x 38", WELLSAW, No. 1338, 70-375 FPM, 1" Blade, Coolant, 3 HP, New SAWS, BAND, HORIZONTAL S0653
9-1/2" x 11", WELLS, No. 58BD, Horizontal/Vertical, 1/2" Blade, Dry, 1/2 HP, NEW SAWS, BAND, HORIZONTAL S0653
13" x 16" WELLSAW No. 1316S, Miter, 70-375 FPM, 1" Blade, Coolant, 3 HP, New SAWS, BAND, HORIZONTAL S0653
4" x 10", FMB, PHOENIX, Miter, 8" Rounds, 1-1/16" Blade, 2 Speeds, 1 HP, New SAWS, BAND, HORIZONTAL S0653
13" x 18", WELLSAW, No. 1318, 13" Rounds, 70-375 FPM, 1" Blade, 3 HP, Wet, NEW SAWS, BAND, HORIZONTAL S0653
10" x 16" Wellsaw, No. 1016, 50-275 FPM, 1" Blade, Wet, 2 HP, NEW SAWS, BAND, HORIZONTAL S0653
18" GROB, No. 4V-18, 40-5000 FPM, 28" x 24" Air-Hyd. Feed Tbl. SAWS, BAND, VERTICAL S0690
20" Leten No. DCM-5, 11" Height Capacity, 23" x 19" Tbl., Low Price, As-Is SAWS, BAND, VERTICAL S0690
26" DoAll No. V-26, 13" Under Guide, 50-1600 FPM, 30" x 30" Tbl., 1-1/2 HP, Low Price SAWS, BAND, VERTICAL S0690
18" x 28" MARVEL No. 8 Mark I, Hi-Column, Tilt Head, 50-450 FPM, 1" Blade, 2 HP, Reconditioned 2019 SAWS, BAND, VERTICAL S0690
18" x 20" MARVEL No. 8, Tilt Head, Coolant, Parts Machine SAWS, BAND, VERTICAL S0690
18" GROB, No. 4V-18, 40-5000 FPM, 28" x 24" Air-Hyd. Feed Tbl., Clean SAWS, BAND, VERTICAL S0690
36" DoAll No. 3613-1, Vertical Bandsaw SAWS, BAND, VERTICAL S0690
26" DOALL No. 2618-3D, 18" Work Height, 40-10,800 FPM, 41" x 32" Tbl., 7-1/2 HP SAWS, BAND, VERTICAL S0690
20" DOALL VERTICAL BANDSAW SAWS, BAND, VERTICAL S0690
20" x 25" HEM Model V150A, Miter, 1-1/2" Blade, 10 HP, 1996 SAWS, BAND, VERTICAL S0690
10" x 10" KASTO-RACINE, No. SSB260VA, Auto. Feed, Hyd., Clean SAWS, BAND, VERTICAL S0690
36" DOALL No. 3612-2H3, 12" Under Guide, 5-5200 FPM, 1985 SAWS, BAND, VERTICAL S0690
36" GROB VERTICAL BANDSAW SAWS, BAND, VERTICAL S0690
20" DOALL No. 2013-V, 25" Under Guide, 55-5200 FPM, 26" x 26" Tbl., 2 HP, Clean SAWS, BAND, VERTICAL S0690
18" x 28" HYD-MECH No. V-18, Tilt Frame, Canted Head, 18" Rounds, 1-1/4" Blade, 5 HP, 1998, For Special Applications SAWS, BAND, VERTICAL S0690
20" WELLSAW No. V-20-24, 24" Under Guide, 45-3000 FPM, 26" x 26" Tbl, 3 HP, New SAWS, BAND, VERTICAL S0690
20" DAKE Trademaster, 12" Height, 50-500 FPM, 24" x 24" Tbl.,1.5 HP, New SAWS, BAND, VERTICAL S0690
20" x 28" COSEN AV-2026NC, Miter, Programable, Auto. Feed, New SAWS, BAND, VERTICAL S0690
20" WELLSAW No. V-20F, 16" Under Guide, 45-3000 FPM, 26" x 26" Tbl, 3 HP, New SAWS, BAND, VERTICAL S0690
18" x 22" MARVEL SERIES 8 MARK III, Tilt Frame, 1-1/4" Blade, 50-450 FPM, Coolant, New SAWS, BAND, VERTICAL S0690
16" DAKE No. V-16, V-Speed 82-3950 FPM, 21" x 24" Tbl., 2 HP, New SAWS, BAND, VERTICAL S0690
18" x 22", MARVEL SERIES 8 MARK II, Tilt Frame, Vertical Bandsaw, 1" Blade, Coolant, New SAWS, BAND, VERTICAL S0690
14" SCOTCHMAN No. CPO-350 VSPKPD, Miter, V-Speed, 2" Solids, 4" Tube, Power Downfeed, Air Vise, 5 HP, New, Must be ordered. SAWS, CIRCULAR COLD S0730
14" KMT No. C370, Miter, 18/36 RPM, 4" Solid Round Capacity, Air Vise, 4 HP, Clean SAWS, COLD & CARBIDE S0805
12" SCOTCHMAN No. CPO 315 RFA, Auto Feed, 3" Tube, 2" Solids, New SAWS, COLD & CARBIDE S0805
14" WILTON/MEP, No. 350CNCFE, Programmable, Miter, 4-1/2" Rounds, 3-3/4" Square, Clean SAWS, COLD & CARBIDE S0805
CNC UP CUT SAW SAWS, COLD & CARBIDE S0805
12" SCOTCHMAN No. CPO 315 RFA/HT, Auto Feed, 3.5" Dia. Tube, 2" Dia. Solids, 2001 SAWS, COLD & CARBIDE S0805
14" MEP, No. 350CNCFE, Programmable, Miter, 4-1/2" Rounds, 3-3/4" Square, Clean SAWS, COLD & CARBIDE S0805
10", SCOTCHMAN, No. CPO 275LT, Miter, 30/60 RPM, 1.5" Solid Rounds, Coolant, New SAWS, COLD & CARBIDE S0805
14" SCOTCHMAN No. CP0 350 PDLT, 4.5" Round Tube, Pneu. Down Feed, 3 HP, New SAWS, COLD & CARBIDE S0805
14" SCOTCHMAN No. CPO 350LT, Miter, 22/44 RPM, 2" Solid Rounds, Coolant, New SAWS, COLD & CARBIDE S0805
12" SCOTCHMAN No. CPO 315 HFA, Auto Feed, New SAWS, COLD & CARBIDE S0805
14" SCOTCHMAN No. CPO350 VS/PK , Miter, V-Speed, 2" Solids, 4" Tube, Air Vise, 5 HP, New SAWS, COLD & CARBIDE S0805
10", SCOTCHMAN, No. CPO275SS, Miter, 60 RPM, 1.5" Solid Rounds, Coolant, New SAWS, COLD & CARBIDE S0805
14", KMT, No. C360SA, Semi-Auto., Miter, 4" Cap., Coolant, 4 HP, New SAWS, COLD & CARBIDE S0805
14" SCOTCHMAN Cold Saw, No. CP0 350 LT/PK/PD, Pneu. Down Feed, Air Clamp, New SAWS, COLD & CARBIDE S0805
SCOTCHMAN, Advanced Feed System, Programmable Stop, 16' Working Length SAWS, COLD & CARBIDE S0805
12-1/2", KMT, No. C316, Miter, Vert. Column, 4" Tubing, 3" Solids, 2.5 HP, 2004 SAWS, COLD & CARBIDE S0805
10", SCOTCHMAN, No. CPO 275LT, Miter, 30/60 RPM, 1.5" Solid Rounds, Coolant, New SAWS, COLD & CARBIDE S0805
14" SCOTCHMAN No. CPO 350LT, Miter, 22/44 RPM, 2" Solid Rounds, Coolant, New SAWS, COLD & CARBIDE S0805
OLIVER No. 858-M, 52" Diameter Blade, Hyd. Vise, 25 HP SAWS, COLD & CARBIDE (Non-ferrous) S0825
Wegoma Model DMS, 1995 SAWS, COLD & CARBIDE (Non-ferrous) S0825
Scotchman 12' RG Stop/Pusher System-Mini PC SAWS, COLD & CARBIDE (Non-ferrous) S0825
20" SCOTCHMAN SUP-500NF, Upcut, Miter, 7" Rounds, 5 HP, New SAWS, COLD & CARBIDE (Non-ferrous) S0825
14" SCOTCHMAN CPO 350 NF, Miter, 1500/3000 RPM, 3" Solid Rounds, 3 HP, New SAWS, COLD & CARBIDE (Non-ferrous) S0825
14", SCOTCHMAN CPO 350 NFPKPD, Miter, 1500/3000 RPM, Coolant, 3 HP, New SAWS, COLD & CARBIDE (Non-ferrous) S0825
10", SCOTCHMAN CPO 275HTPK, Miter, 2 Speed 60/120 RPM, Coolant, New SAWS, COLD & CARBIDE (Non-ferrous) S0825
10" DELTA UNISAW, Tilting Arbor, 5 HP, Biesemeyer Fence SAWS, WOODWORKING S1402
WELLS HOR. BANDSAW SHAPERS, HORIZONTAL S2804
6" PRATT & WHITNEY VERTICAL SLOTTER SHAPERS, VERTICAL - See S5748 S3004
52" x 16 Ga. TENNSMITH No. T52, Front Supports, ROMBG, 2007, Clean SHEARS, FOOT POWER S3804
16 Ga. x 52", NATIONAL, No. N5216, Back Gauge, Front Supports, New SHEARS, FOOT POWER S3804
16 Ga. x 52" Tennsmith, Front Supports, Back Gage, New SHEARS, FOOT POWER S3804
14' Wysong, Pneumatic Shear SHEARS, POWER SQUARING (Gauges) - See Also S4105 S4104
16 Ga. x 52" NATIONAL No. NH5216, Hyd., Back Gauge, Front Arms, New, In Stock SHEARS, POWER SQUARING (Gauges) - See Also S4105 S4104
12 Ga. x 52" NATIONAL No. NH5212, Hyd., Back Gauge, Front Arms, New SHEARS, POWER SQUARING (Gauges) - See Also S4105 S4104
12 Ga. x 52", NATIONAL, No. NA5212, Air, Back Gauge, Front Extensions, New SHEARS, POWER SQUARING (Gauges) - See Also S4105 S4104
16 Ga. x 52", NATIONAL, No. NA5216, Air, Back Gauge, Front Extensions, New SHEARS, POWER SQUARING (Gauges) - See Also S4105 S4104
12 Ga. x 36", NATIONAL, No. NA3612, Air, Back Gauge, Front Arms, New SHEARS, POWER SQUARING (Gauges) - See Also S4105 S4104
10 Ga. x 52", NATIONAL, No. NH5210, Hyd., Back Gauge, Front Arms, New SHEARS, POWER SQUARING (Gauges) - See Also S4105 S4104
12 Ga. x 52", NATIONAL, No. NH5212, Hyd., Back Gauge, Front Arms, New SHEARS, POWER SQUARING (Gauges) - See Also S4105 S4104
16 Ga. x 52", NATIONAL, No. NH5216, Hyd., Back Gauge, Front Supports, New SHEARS, POWER SQUARING (Gauges) - See Also S4105 S4104
12 Ga. x 36", NATIONAL, No. NH3612, Hyd., Back Gauge, Front Arms, New SHEARS, POWER SQUARING (Gauges) - See Also S4105 S4104
16 Ga. x 36", TENNSMITH, No. 36A, SHEARS, POWER SQUARING (Gauges) - See Also S4105 S4104
1/4" x 10' ACCURSHEAR No. 825010, FOPBG, 20 HP, Clean SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
1/4" x 10' Wysong No. 1025, Mech., 36" B G., PC 100 Programmable Control, 1989, Low Price SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
1/4" x 12' CINCINNATI No. 2500, Hyd., 48" CNC B.G., 1987 SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
10' x 1/4" CINCINNATI No. 2H10, Hyd., 36" FOPBG, 10' Sq. Arm SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
1/2" x 12' CINCINNATI 5000X12, Hyd., 48" B.G., Sq. Arms, 1992 SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
BACK GAUGE: Fits 6' National Shears, Digital, New, In Stock SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
New Betenbender Hydraulic Shear SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
New Betenbender Hydraulic Shear SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
New Betenbender Hydraulic Shear SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
New Betenbender Hydraulic Shear SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
1/2" x 10', CINCINNATI CENTURY Hydraulic Shear, FOPBG, Squaring Arm, Front Supports SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
1/2" x 2', SCOTCHMAN, No. 610, Hyd., 12" x 1" Cap., Back Gauge, 10 HP, New SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
1/4" x 10', NATIONAL, No. NH12025, Hyd., Back Gauge, Front Supports, New SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
1/4" x 8', NATIONAL Shear, No. NH9625, Hyd., Back gauge, Front Supports, New SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
1/4" x 6', NATIONAL, No. NH7225, Hyd., Back Gauge, Front Supports, New SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
1/4" x 4', NATIONAL, No. NH4825, Hyd., Manual Back Gauge, New SHEARS, POWER SQUARING (Inches) - See Also S4104 S4105
QUICKWORK No. 10A, Rotary Shear, 14 Ga. Cap., 60" Throat SHEARS, ROTARY, INCL. RING & CIRCLE, (Gauges) - See Also F2100 S4156
3/16" Capacity, BY GEORGE No. CS-5273, 52" Max. Circle, 1 Phase SHEARS, ROTARY, INCL. RING & CIRCLE, (Inches) - See Also F2100 S4157
TENNSMITH, No. CLEAT BENDER, NEW SHEET METAL FORMING MACHINERY - (See Also Specific Categories) S4640
COMBINATION MACHINE, NIAGARA, No. 180, Power, 14 Ga. Capacity, 12" Throat, 1 HP SHEET METAL MACHINERY - (See Also Specific Categories) S4654
ROTARY MACHINE, TENNSMITH, No. PR-16, 16 Ga., 10" Throat, V-Speed, 1/2 HP, New SHEET METAL MACHINERY - (See Also Specific Categories) S4654
DAKE, Shrinker/Stretcher, 16 Ga. Cap., 18" Throat, 1 HP, 1 Phase, New SHRINKERS S5160
CAMERON SLITTER/REWINDER SLITTERS - See Also S5456 S5354
5" x 1" P/A No. PPR-100, 1 Phase, 2001-Never Used SLITTERS - See Also S5456 S5354
WILDER,Gang Slitter, No. LD2051,51" max width,3 cuts @ 24ga.Speed 43 sfm.,1/3 Hp SLITTERS - See Also S5456 S5354
WILDER, Gang Slitter, No. LD2051, 51" max width, 3 cuts @ 24ga.Speed 43 sfm,1/3 Hp SLITTERS - See Also S5456 S5354
Wilder No. 2024, Power, 20 Ga., 24" Max. Slit Width, 90 SFM, 1/3 HP, New SLITTERS - See Also S5456 S5354
36" x 60" x 4" Thick, CHALLENGE, Cast Iron, Factory Stand SURFACE PLATES - See T0104 S8532
LANGELIER SWAGING MACHINE SWAGERS S8650
1-3/4", FENN, No. 3-1/2, Long Die Rotary, 4-1/2" Die Length, 5 HP SWAGERS S8650
SURFACE PLATE, 72" x 120" GOODMAN, 6 1/4" Thick, 25" Top To Floor TABLES, FLOOR & LAYOUT PLATES, (Radial & Boring Mill) T0104
T-SLOTTED PLATE TABLES, FLOOR & LAYOUT PLATES, (Radial & Boring Mill) T0104
59-3/4" ROUND T-SLOTTED PLATE, 3-7/8" Thick, (7) T-Slots TABLES, FLOOR & LAYOUT PLATES, (Radial & Boring Mill) T0104
36" x 60" x 4" Thick, CHALLENGE, Cast Iron, Factory Stand TABLES, FLOOR & LAYOUT PLATES, (Radial & Boring Mill) T0104
72" x 156", Power, Cross Sliding 72" Travel, 9-1/2"H, (6) T-Slots TABLES, ROTARY T0140
15", Horizontal / Vertical Rotary Table TABLES, ROTARY T0140
84", Rotab, No. 84-5, Power Tilt, Power Rotate, T-Slots, Pendant Control TABLES, ROTARY T0140
GARVIN TAPING MACHINE TAPPERS - See Also D3790 T1495
SNOW NUT TAPPING MACHINE, Md. NT-3-RM TAPPERS - See Also D3790 T1495
Speedy Tapping Machine TAPPERS - See Also D3790 T1495
Buffalo Drill, No. 18, Set up with Tapping Head, Single Speed, 1 HP, 1725/1425 RPM, 208-220/440 Volts 60/3 Phase DRILLS, SINGLE SPINDLE, N/C & CNC D6025
Viking Tapper Table TAPPERS - See Also D3790 T1495
ZAGAR, TAPPING HEADS T1753
ZAGAR, TAPPING HEADS T1753
WILSON ROCKWELL Hardness Tester, No. C503-T. TESTERS, HARDNESS T2154
CLARK, No. CTT8, TESTERS, HARDNESS T2154
Kinball TESTERS, MISCELLANEOUS - See Also E4352, L0275, T2265 T2205
Link, Spring Tester TESTERS, MISCELLANEOUS - See Also E4352, L0275, T2265 T2205
THREADER ROLLER THREAD ROLLERS T2520
LANDIS THREADERS, PIPE, (Including Nipple Machines, Pipe, Tube Cutters) T2805
RIDGID No. 141, 2-1/2" - 4" Capacity Pipe & Conduit THREADERS, PIPE, (Including Nipple Machines, Pipe, Tube Cutters) T2805
Landis Single Head Theader THREADERS, PIPE, (Including Nipple Machines, Pipe, Tube Cutters) T2805
Box Table, Universal, 32" x 23" Top, w/3 T-slots, 22"H, 23" x 16" Side w/2 T-slots TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
THREAD ROLLING DIES: Miscellaneous Sizes TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
Die Head: Landis 10F TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
Die Head: Landis 10F TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
CINCINNATI HEAVY DUTY VERTICAL MILLING ATTACHMENT TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
STEADY REST: Leblond, Fits 19" Regal, Roller Type, 6-1/4" Hole TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
STEADY REST: Leblond, Fits 19" Regal, Roller Type, 6-1/4" Hole TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
BORING MILL JAWS, (4), Bolt-On, 8" x 12" Base, For T-Slot Table TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
Steady Rest TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
Threading Attachment for Hardinge Lathe TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
MAGNETIC CHUCK: 14" X 36", Electric, w/Control TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
ANGLE PLATE, 20" x 78", (3) Vertical T-Slots TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
TAILSTOCK, G & L, TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
TAILSTOCK, Off of 5" G. & L., TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
DIVIDING HEAD, L&W. TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
12" CINCINNATI DIVIDING HEAD, NO TAILSTOCK TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
Vertical Head: Cincinnati, No. 3 or 4, 50 Taper TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
STEADY REST FOR CNC LATHE TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
Tracer: Colchester Mimik, Lathe Tracer TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
TURRET ATTACHMENT, 6 POS. FITS 18" SWING LATHE TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
TURRET ATTACHMENT: ENCO 650, 6 POSITIONS, FITS 17" CINCINNATI TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
10" Cincinnati, 50 Taper TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
Spacing Head 17" Swing, 24 Divisions, 10" 30 Jaw, Center TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
Face Plate: Off L&S "T" Lathe, 37" Dia., 12" Hole TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
Face Plates: Off L&S "T" Lathe, (2) 37" x 42" Dia. TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
Outboard Support, Off Model 340 (S/N: 6226) TOOLING & ACCESSORIES - (See Also Specific Categories) T3953
TOOL SETTER, DEVLIEG TOOLING & ACCESSORIES, N/C & CNC T3980
15 KVA Square D Transformer, 480 / 240 Volt Primary, 240 / 120 Volt Secondary, 60 Cycle, Single Phase TRANSFORMERS, SINGLE PHASE, (60 Cycle) T5053
15 KVA, Pri. 480 V, Sec. 240 V,120 V, SQUARE D, DRY,Cat. No. 15S1H TRANSFORMERS, SINGLE PHASE, (60 Cycle) T5053
15 KVA, Pri. 480 V, Sec. 240 V,120 V, SQUARE D, DRY,Cat. No. 15S1H TRANSFORMERS, SINGLE PHASE, (60 Cycle) T5053
15 KVA, Pri. 480 V, Sec. 240 V,120 V, SQUARE D, DRY,Cat. No. 15S1H TRANSFORMERS, SINGLE PHASE, (60 Cycle) T5053
15 KVA, Pri. 480 V, Sec. 240 V,120 V, SQUARE D, DRY,Cat. No. 15S1H TRANSFORMERS, SINGLE PHASE, (60 Cycle) T5053
5 KVA EMERSON Transformer TRANSFORMERS, SINGLE PHASE, (60 Cycle) T5053
75 KVA Dongan Transformer, 600 Volt Primary to 240 / 480 Volt Secondary, No Taps TRANSFORMERS, 3 PHASE, (60 Cycle) T5306
12-1/2 KVA Westinghouse Transformer, 230 / 460 Y to 133 / 266 Y & 230 Volt Delta, 3 Phase TRANSFORMERS, 3 PHASE, (60 Cycle) T5306
Haven No. 912, 2006 TUBE END FINISHING MACHINERY - See Also T6525 T6502
2" PINES No. 660, Air Operated, 7/16" to 2" Capacity, 1 Phase TUBE END FINISHING MACHINERY - See Also T6525 T6502
TUBEMART, TUBE EXPANDERS T6653
TUMBLER BARREL TUMBLING BARRELS - See Also F1650, V2753 T8653
No. A2 CARL KURT WALTHER, 18"D x 18" Dia. Steel Barrel, Power Rotation & Tilt TUMBLING BARRELS - See Also F1650, V2753 T8653
BURR KING No. 200, Bench Top Bowl, 20 Qt., Combi PAK, 1 Phase, New VIBRATORY FINISHERS - See Also D0654 V2753
Magnus Batch Type Parts Washer WASHING EQUIPMENT - See Also D1054, F9240 W0504
PARTS WASHER, MARK ONE WASHING EQUIPMENT - See Also D1054, F9240 W0504
PARTS WASHER, MARK ONE, WASHING EQUIPMENT - See Also D1054, F9240 W0504
PARTS WASHER, AUTOMATED FINISHING, No. 2954, WASHING EQUIPMENT - See Also D1054, F9240 W0504
PARTS WASHER, RANSOHOFF, IMMERSOJET, Rotating Basket, Wash, Rinse, Blow Off,1994 WASHING EQUIPMENT - See Also D1054, F9240 W0504
125 Amp Lincoln Power Arc 4000, AC Stick Welder/4000 Watt AC Generator, Gas Powered, Nice WELDERS, ARC W1003
MILLER 330A/BP, 300 Amp, AC-DC Inert Gas Welder, Nice WELDERS, ARC W1003
400 Amp THERMAL ARC No. 400S DC Inverter, 3 Phase WELDERS, ARC W1003
350 Amp, MILLER, Synchrowave 350, 1991 WELDERS, ARC W1003
350 Amp, MILLER, Syncrowave 350, 1992 WELDERS, ARC W1003
METCO, Robotic Plasma Spray WELDERS, PLASMA W2480
20 KVA REX No. FRU, Rocker Arm, 17" Throat, 220 Volt, 1 Phase WELDERS, SPOT W3054
15 KVA PEER No. 92, Rocker Arm, 14" Throat, 220 Volt, 1 Phase WELDERS, SPOT W3054
100 KVA, PEER, Spotwelder WELDERS, SPOT W3054
LINCOLN WIRE FEED WELDER WELDERS, WIRE FEED W3550
LINCOLN WIRE FEED WELDER WELDERS, WIRE FEED W3550
LINCOLN WIRE FEED WELDER WELDERS, WIRE FEED W3550
LINCOLN WIRE FEED WELDER WELDERS, WIRE FEED W3550
LINCOLN, WELDERS, WIRE FEED W3550
LINCOLN, WELDERS, WIRE FEED W3550
LINCOLN, WELDERS, WIRE FEED W3550
LINCOLN, WELDERS, WIRE FEED W3550
LINCOLN, WELDERS, WIRE FEED W3550
LINCOLN, WELDERS, WIRE FEED W3550
LINCOLN, WELDERS, WIRE FEED W3550
LINCOLN, WELDERS, WIRE FEED W3550
LINCOLN, WELDERS, WIRE FEED W3550
LINCOLN, WELDERS, WIRE FEED W3550
1000 Lb. KOIKE ARONSON No. RPFT2.5, 60" Dia, Table, 2007 WELDING POSITIONERS - See Also M0702 W3752
Geo. Whiting Co. Welding Planisher WELDING POSITIONERS - See Also M0702 W3752
10 Ton PANDJIRIS MM 15/5, Drive & Idler, 4"-12' Dia. Capacity, V-Speed, Pendant WELDING TURNING ROLLS W3870
WIRE REEL, SHUSTER, Universal WIRE MACHINERY, MISCELLANEOUS W6053
TABLE SAW: 10" Delta Unisaw, Tilting Arbor, 2 HP, Table Extension, Clean WOODWORKING MACHINERY - (See Also Specific Categories) W8304
BACCI SINGLE TENONER WOOD WORKING WOODWORKING MACHINERY - (See Also Specific Categories) W8304
24" FAY & EGAN No. 560, Wood Working Planer, 1 Phase WOODWORKING, PLANERS W8345
30" OLIVER No. 217-D, 26" x 28" Table, 3 HP, Nice WOODWORKING, SAWS, BAND W8355
DIEHL, No. SL 52,Var-Speed feed,2" Arbor,18" Blade, 20 Hp. Low Price Saws, Rip, Straight Line W8855
DELTA, Saws, Table W8860
Back to Inventory Home

© Copyright C.W.Wood 2012 admin log in