Inventory Details

Return to Inventory Home

15 Ton AIRAM PulsAir No. PA15-0101, 4-Post, 3" Max. Stroke, 14.5" Die Height, 35" x 25" Bed, 2006, Excellent

Inventory ID: 30314
Manufacturer: Airam
Specifications: AIRAM PNEUMATIC FOUR POST PRESS

MODEL: PulsAir PA15-0101
SERIAL NUMBER: 7001-PA15-0101   Year: 2006

"The Pulsair model press offers a manually set adjustable stroke from .25" to 3" in .006" increments."

Note: Press originally manufactured in March of 2006 exhibited at the Metalform Show in Nashville, TN. Purchased by John A. Logan College for use in their stamping & technology  fields. Primarily used for testing of dies built by students. 

GENERAL SPECIFICATIONS

Holding Tonnage @ 100 psi/.5" - 1" Stroke: 15 Tons
Holding Tonnage @ 100 psi/2" Stroke: 14 Tons
Holding Tonnage @ 100 psi/3" Stroke: 13 Tons
Impact Tonnage: 2 x Holding Tonnage
Die Open Height: 14.50"
Bed Size: 35" x 25"
Usable Die Space Area: 25" x 19.7"
Distance Between Guide Pins: 25" x 15"
Standard Strokes Per Minute @ 3" Stroke: 90
Standard Strokes Per Minute @ 2" Stroke: 110
Standard Strokes Per Minute @ 1" Stroke: 220
Standard Strokes Per Minute @ 1/2" Stroke: 500
Floor To Top Of Bed With Mounts: 33-1/4"
Input Voltage: 110 Volt, 1 Phase

EQUIPPED WITH

Control Pedestal Including: Two Hand Run/Cycle Buttons, Off/Manual/Continuous Selector Switch,   Top Stop Button, Emergency Stop Button, Strokes Per Minute & Batch Counter 
Polycarbonate Die Area Guarding w/Access Door On Front and Rear
Adjustable Stroke Mechanisms
Tie Rod Style Precision Guide Posts
Air Surge Tank (13 Gallon)
(4) Set-up Blocks
Set Of 4 Vibration Mounts
Operation and Instruction Manual

Approximate Weight: 8000 Lbs.

F.O.B. Cincinnati, Ohio

ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER

Back to sub-category listing (Presses, Air)

Back to Inventory Home


© Copyright C.W.Wood 2012 admin log in